1605000 Phoenix Contact, 1605000 Datasheet - Page 2

• Manufacturer Part Number: 1605000
• Description: HEAVYCON INSERT MODULE ML 2POS
• Manufacturer: Phoenix Contact
• Series: HEAVYCON® Mr

Specifications of 1605000

• Connector Type: Module
• Gender: Male
• Number Of Positions: 2
• Termination Style: Screw
• Voltage Rating: 600V
• Current Rating: 100A
• Contact Plating: Silver
• Insert / Contact Gender: Male
• Number Of Positions / Contacts: 2
• Product Type: Inserts
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Size: -
• Contact Type: -
• Lead Free Status / Rohs Status: Details
• Other names: HC-M-HS-MOD-ST

HC-M-HS-MOD-ST
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1605000
PHOENIX CONTACT Deutschland GmbH
http://www.phoenixcontact.de
Rated voltage (III/3)
Rated current
Rated surge voltage
Ambient temperature (operation)
Number of positions
Mechanical characteristics
Conductor cross-section
Connection cross-section AWG
Stripping length of the individual wire
Tightening torque
Wire diameter including insulation
Hexagonal socket
Insertion/withdrawal cycles
General characteristics
Number of module slots
Connection method
Inflammability class acc. to UL 94
Pollution degree
Surge voltage category
Assembly instructions
Connection
Order No.: 1605000
1000 V
100 A
8 kV
-40 °C ... 125 °C
2
16 mm² ... 35 mm²
4 ... 2
13 mm
6 Nm (16 mm
7 Nm (25 mm
8 Nm (35 mm
11.4 mm
SW 4
≥ 500
2
Axial screw connection
V0
3
III
- Use HC housing h >= 72 mm- Connection of wires using a 4
mm Allen wrench- Axial screw connection only for stranded wires-
Plug-in connections may only be operated only when there is no
load/voltage
Note for axial connection method The specified conductor
cross-sections refer to the geometric cross-section of the used
conductor.The use of conductors with a geometric cross-
section that deviates greatly from the nominal cross-section
of the conductor should be checked first.The wiring space of
the axial screw technology has been designed for fine strand
conductors as per VDE 0295 class 5. Deviating conductor
superstructures (e.g. class 6 conductors) must be checked before
use.Connection It must be ensured before installation that the
ball screw is completely turned back (chamber is open). Twisting
the conductors is not allowed. The cores must be pushed up to
the end of the contact chamber (until the contact is insulated).
Keep the core in this position and tighten it using an Allen key.
The required core end must be cut before a reconnection.
Tightening the connection screw is allowed only once in order to
prevent a breakage of the litz wire.
2
2
2
)
)
)
Jan 27, 2011
Page 2 / 5