ATTINY9-MAH Atmel, ATTINY9-MAH Datasheet - Page 16

• Manufacturer Part Number: ATTINY9-MAH
• Description: IC MCU AVR 1K FLASH 8UDFN
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY9-MAH

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 12MHz
• Peripherals: POR, PWM, WDT
• Number Of I /o: 4
• Program Memory Size: 1KB (512 x 16)
• Program Memory Type: FLASH
• Ram Size: 32 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-UFDFN Exposed Pad
• Core: AVR8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

8. Errata
8.1
8.1.1
8.1.2
8.1.3
8.2
8.2.1
16
ATtiny4
ATtiny5
ATtiny4/5/9/10
Rev. E
Rev. D
Rev. A – C
Rev. E
The revision letters in this section refer to the revision of the corresponding ATtiny4/5/9/10
device.
•
1. Programming Lock Bits
•
•
1. ESD HBM (ESD STM 5.1) level ±1000V
2. Programming Lock Bits
Not sampled.
•
1. Programming Lock Bits
Programming Lock Bits
ESD HBM (ESD STM 5.1) level ±1000V
Programming Lock Bits
Programming Lock Bits
Programming Lock Bits to a lock mode equal or lower than the current causes one word of
Flash to be corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
The device meets ESD HBM (ESD STM 5.1) level ±1000V.
Problem Fix / Workaround
Always use proper ESD protection measures (Class 1C) when handling integrated circuits
before and during assembly.
Programming Lock Bits to a lock mode equal or lower than the current causes one word of
Flash to be corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
Programming Lock Bits to a lock mode equal or lower than the current causes one word of
Flash to be corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
8127DS–AVR–02/10