ATTINY40-SU Atmel, ATTINY40-SU Datasheet - Page 5

• Manufacturer Part Number: ATTINY40-SU
• Description: IC MCU AVR 4K FLASH 20SOIC
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY40-SU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 12MHz
• Connectivity: I²C, SPI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 18
• Program Memory Size: 4KB (2K x 16)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (0.300", 7.50mm Width)
• Processor Series: ATtiny
• Core: AVR
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: SPI, TWI, ISB
• Number Of Programmable I/os: 18
• Number Of Timers: 2
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Operating Temperature Range: - 40 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

ATtiny40
The resulting architecture is compact and code efficient while achieving throughputs up to ten
times faster than conventional CISC microcontrollers.
The ATtiny40 provides the following features: 4K bytes of In-System Programmable Flash, 256
bytes of SRAM, twelve general purpose I/O lines, 16 general purpose working registers, an 8-bit
Timer/Counter with two PWM channels, a 8/16-bit Timer/Counter, Internal and External Inter-
rupts, an eight-channel, 10-bit ADC, a programmable Watchdog Timer with internal oscillator, a
slave two-wire interface, a master/slave serial peripheral interface, an internal calibrated oscilla-
tor, and four software selectable power saving modes.
Idle mode stops the CPU while allowing the SRAM, Timer/Counter, ADC, Analog Comparator,
and interrupt system to continue functioning. ADC Noise Reduction mode minimizes switching
noise during ADC conversions by stopping the CPU and all I/O modules except the ADC. In
Power-down mode registers keep their contents and all chip functions are disabled until the next
interrupt or hardware reset. In Standby mode, the oscillator is running while the rest of the
device is sleeping, allowing very fast start-up combined with low power consumption.
The device is manufactured using Atmel’s high density non-volatile memory technology. The on-
chip, in-system programmable Flash allows program memory to be re-programmed in-system by
a conventional, non-volatile memory programmer.
The ATtiny40 AVR is supported by a suite of program and system development tools, including
macro assemblers and evaluation kits.
5
8263AS–AVR–08/10