EA STARTEDIP320J ELECTRONIC ASSEMBLY, EA STARTEDIP320J Datasheet - Page 17

• Manufacturer Part Number: EA STARTEDIP320J
• Description: LCD Graphic Display Modules & Accessories Starter/Demoboard w/Touch USB prog
• Manufacturer: ELECTRONIC ASSEMBLY

Specifications of EA STARTEDIP320J

• Pixel Density: 320 x 240
• Fluid Type: FSTN Positive
• Module Size (w X H X T): 121 mm x 92.6 mm x 11.6 mm
• Viewing Area (w X H): 115.18 mm x 86.38 mm
• Backlighting: Black / White
• Background Color: White
• Operating Temperature Range: - 20 C to + 70 C
• Attached Touch Screen: Yes
• Interface: RS-232, I2C BUS, or SPI BUS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Specifications may be changed without
prior notice. Printing error reserved
Command
Define touch key (key
remains depressed as long
as there is contact)
Define touch switch (status
of the switch toggles after
each contact)
Define touch key with menu
function
Define drawing area
Define free touch area
Set bar by touch
Touch frame form
Touch key response
Invert touch key
Query touch switch
Set touch switch
Radio group for switches
Query radio group
Delete touch area
Send bar value
automatically
Touch query on/off
Rotate touch query
Label font
Label zoom factor
Add. line spacing
Label angle
Codes
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
A
A
A
A
A
A
A
A
M
W
U
K
D
H
B
E
S
N
X
P
R
G
V
Q
A
O
Y
T
J
L
F
Z
I
EA eDIP320-8: Commands for the touch panel
Code
Code
Code
Code
xx1 yy1 xx2 yy2
xx1 yy1
xx1 yy1 xx2 yy2
xx1 yy1
xx1 yy1 xx2 yy2
xx1 yy1 xx2 yy2
xx1 yy1 xx2 yy2
xx1 yy1
n1
n1
n1
n1
n1
n1
n1
n1
n1
n1
n1
n1
n1
n1
n1
n2
n1
n1
n1
down
down
code
code
down
down
down
code
code
code
code
code
n1
up
up
Remarks
A drawing area is defined. You can then draw with a line width of n1 within the corner
coordinates xx1,yy1 and xx2,yy2.
A freely usable touch area is defined. Touch actions (down, up and drag) within the corner
coordinates xx1,yy1 and xx2,yy2 are sent.
The bar graph with the no. n1 is defined for input by touch panel.
The frame type for the display of touch keys/switches is set with n1
Automatic inversion when touch key touched: n1=0=OFF; n1=1=ON;
Tone sounds briefly when a touch key is touched: n1=0=OFF; n1=1=ON
The touch key with the assigned return code is inverted manually
The status of the switch (off=0; on=1) is placed in the send buffer.
The status of the switch is changed by means of a command (n1=0=off; n1=1=on).
Only 1 switch in a group is active at any one time; all the others are deactivated. nr=0: newly
defined switches do not belong to a group. nr=1 to 255: newly defined switches belong to the
group with the number nr. In the case of a switch in a group, only the down code is
applicable. the up code is ignored.
the down code of the activated switch from the radio group with the number n1 is placed in
the send buffer.
The touch area with the return code (code=0: all touch areas) is removed from the touch
query. When n1=0, the area remains visible on the display; when n1=1, the area is deleted.
remove the Touch area that includes the coordinates xx1,yy1 from the touch query. n1=0:
area remains visible; n1=1: Delete area
The Automatic transmission of a new bar graph value by touch input is deactivated (n1=0); a
new value is sent after setting (n1=1); each change is sent during setting (N1=2).
Touch query is deactivated (n1=0) or activated (n1=1);
n1=0: normal query; n1=1: Touch query for top view (solder straps changed over)
Set font with the number n1 (0 to 31) for touch key label
n1 = X zoom factor (1x to 8x); n2 = Y zoom factor (1x to 8x)
Insert n1 pixels (0 to 15) between two lines of text as additional line spacing
Text output angle: n1=0: 0°; n1=1: 90°; n1=2: 180°; n1=3: 270°
code
code
code
Touch: Define areas
text
text
up
up
up
...
...
Touch: Label font
Touch: settings
NUL
NUL
mnu
code
text
text
...
...
NUL
NUL
text
...
'T': The area from xx1,yy1 to xx2,yy2 is defined as a key. 'U': Image no. n1
is loaded to xx1,yy2 and defined as a key. 'down code':(1-255) Return/touch
macro when key pressed. 'up code': (1-255) Return/touch macro when key
released. (down/up code = 0 press/release not reported). ´text´: the first
character determines the alignment of the text (C=centered, L=left justified,
R=right justified). this is followed by a string that is placed in the key with the
current touch font. multiline texts are separated with the character '|' ($7C,
dec: 124); 'nul': ($00) = end of string
'K': The area from xx1,yy1 to xx2,yy2 is defined as a switch. 'J': Image no.
n1 is loaded to xx1,yy2 and defined as a switch. 'down code': (1-255)
Return/touch macro when switched on. 'up code': (1-255) Return/touch
macro when switched off. (down/up code = 0 on/off not reported). ´text´: the
first character determines the alignment of the text (C=centered, L=left
justified, R=right justified). this is followed by a string that is placed in the key
with the current touch font. multiline texts are separated with the character '|'
($7C, dec: 124); 'nul': ($00) = end of string
NUL
The area from xx1,yy1 to xx2,yy2 is defined as a menu key. 'down
code':(1-255) Return/touch macro when pressed. 'up Code':(1-255)
Return/touch macro when menu canceled 'mnu Code':(1-255)
Return/menu macro+(item no. 1) after selection of a menu item.
(down/up code = 0: activation/cancellation is not reported.) 'text':=
string with the key text and the menu items. the first character
determines the direction in which the menu opens (R=right, L=left,
O=up, U=down). The second character determines the alignment of the
touch key text (C=centered, L=left justified, R=right justified). The menu
items are separated by the character '|' ($7C,dec:124) (e.g.
"uckey|item1|item2|item3". The key text is written with the current
touch font and the menu items are written with the current menu font.
The background of the menu is saved automatically.
EA eDIP320-8
Page 17
After
reset
1,1
1
1
1
0
1
1
0
0