PDS500G011 Vishay, PDS500G011 Datasheet - Page 4

• Manufacturer Part Number: PDS500G011
• Description: Plasma Displays Video Controller 8-24VDC
• Manufacturer: Vishay
• Type: Display Controllerr

Specifications of PDS500G011

• Description/function: Can drive variety of popular plasma displays, 3 fonts available: 4 x 5, 5 x 7, 10 x 14. Custom non-standard characters and images may be loaded.
• Interface: 8 bit parallel, RS-232
• Operating Temperature Range: - 20 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SERIAL INTERFACE
J3, SERIAL INTERFACE CONNECTOR. Optional serial interface, mates with AMP 10-pin IDC type 746288-1 or equivalent.
The baud rate is jumper selected by jumper block W1 for 9600 or 19.2K baud.
SERIAL INTERFACE PIN CONNECTIONS.
W1 JUMPER (CONFIGURATION)
Shunt pairs of pins on jumper W1 to select display format,
serial interface baud rate, parallel interface operation, or
self-test functions.
128 x 32
128 x 64
192 x 64
256 x 64
320 x 64
19.2K
PARALLEL
SELF TEST
At least 1 jumper must be placed to select display pixel format.
Default communications is serial 9600 baud, unless 19.2K
or PARALLEL is jumpered.
Jumpering both SELF TEST and PARALLEL will run a self
demo configured for the 128 x 64 display.
Note: Display must be reset (power-up condition) to activate
jumper selection.
www.vishay.com
4
PDS-500/-1
Vishay Dale
W2 JUMPER (DOT CLOCK)
The following dot clock settings are recommended for the
various display formats:
The scan rate may affect the dim brightness level, there
should be little or no affect on the bright level.
DISPLAY CONNECTOR J3 AND HOST CONNECTION
PIN
10
1
2
3
4
5
6
7
8
9
DISPLAY SIZE
128 x 32
128 x 64
192 x 64
256 x 64
320 x 64
APD-128G032/A
APD-128G064/D
APD-192G064/-x
APD-256G064/A/-x
APD-320G064/-x
19,200 baud serial communications
8-bit parallel interface communications
Self Test, graphic mode
JUMPER SETTING
1MHz (500KHz)
2MHz (1MHz)
500 (250)kHz
1MHz
2MHz
DESCRIPTION
n/c (reserved)
n/c (reserved)
n/c (reserved)
n/c (reserved)
n/c (reserved)
RTS (output)
TxD (output)
CTS (input)
RxD (input)
GND
122Hz (61Hz)
SCAN RATE
122 (61)Hz
122 (61)Hz
81Hz
97Hz
DB-9
DISPLAY INTERFACE
J4, DISPLAY INTERFACE CONNECTOR. Mates with AMP
14-pin IDC type 746285-2 or equivalent. Connects directly
to VISHAY DALE display models APD-128G032/A, APD-
128G064/D, APD-192G064/-x, APD-256G064/-x, and APD-
320G064/-x.
For an explanation of these signals, refer to the appropri-
ate display data sheet.
2
7
3
8
5
DISPLAY INTERFACE PIN CONNECTIONS
PIN NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DB-25
3
4
2
5
7
DESCRIPTION
display enable
GND
row data (VSYNC)
GND
row clock (HSYNC)
GND
column latch (HSYNC)
GND
dot clock
GND
dot data
GND
no connection (reserved)
GND
Document Number: 37074
DESCRIPTION
Revision 14-Mar-02
R x D
T x D
GND
CTS
RTS