AASL4805QR425S/5-W2 Kingbright Corp, AASL4805QR425S/5-W2 Datasheet - Page 2

• Manufacturer Part Number: AASL4805QR425S/5-W2
• Description: LED Arrays, Modules and Light Bars Warm White 5.8W 290lm 3000K LED Bar
• Manufacturer: Kingbright Corp

Specifications of AASL4805QR425S/5-W2

• Product: LED Light Bars
• Illumination Color: Warm White
• Power Consumption: 5.8 W
• Color Temperature: 2870 K to 3220 K
• Light Bar Length: 48 mm
• Supply Voltage: 10.3 V
• Supply Current: 500 mA
• Wavelength/color Temperature: 2870 K to 3220 K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SPEC NO: DSAK3010
APPROVED: WYNEC
3. Thermal grease between the light bar and heat sink is recommended to fill air gaps for better thermal conductivity.
4. For securing the LED light bar, M2 screws are recommended. The light bar should not be bent or stressed in any way
5. To prevent damages caused by electrostatic discharge (ESD), it is recommended to wear proper gear such as
6. Constant current source is recommended to power the light bar. When more than one light bar are used, they should
7. Thermal management should be taken into consideration when using the product. Maximum driving current
8. Soldering recommendations:
Precautions
1. Do not touch the lens with any sharp object.
2. No stress should be applied on the lens.
which could damage the internal circuit.
be connected in series if possible.
should be reduced accordingly at higher ambient temperature to prevent overheating.
wristband or anti-static gloves when handling the product.
Soldering iron power should not exceed 40W, and should not be in contact with the joint for more than 3.5 secs.
The maximum soldering temperature should be less than 350°C.
Do not touch the product immediately after soldering.
Not reflow compatible.
REV NO: V.1
CHECKED: Allen Liu
DATE: JAN/15/2010
DRAWN: S.P.Chen
PAGE: 2 OF 9