G3NA-225B-AC100-120 Omron, G3NA-225B-AC100-120 Datasheet - Page 9

• Manufacturer Part Number: G3NA-225B-AC100-120
• Description: Solid State Relays 100-120VA/240VAC 25A
• Manufacturer: Omron

Specifications of G3NA-225B-AC100-120

• Control Voltage Range: 100 VAC to 120 VAC
• Load Voltage Rating: 240 V
• Off State Leakage Current (max): 5 mA, 10 mA
• Load Current Rating: 25 A
• Contact Form: 1 Form A
• Output Device: Triac
• Input To Output Isolation Method: Photocoupler
• Relay Type: General Purpose Hockey Puck
• Termination Style: Screw
• Operating Voltage Range: 19VAC To 264VAC
• Load Current: 25A
• Isolation Voltage: 2500VAC
• Control Voltage Type: AC
• Relay Terminals: Screw
• Load Voltage Min: 24VAC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

G3NA
When attaching a heat sink to the G3NA, apply Silicone Grease or
equivalent heat conductive grease on the heat sink. (Toshiba Sili-
con, Shinetsu Silicon, etc.)
Tighten the mounting screws of the heat sink with a torque of 0.78 to
0.98 N S m.
EN55011 Measurement of Mains Terminal Disturbance
Voltage
The G3NA-UTU conforms to EN55011 standards when a capacitor
is connected to the load power supply as shown in the following cir-
cuit diagram.
164
Cat. No. K067-E1-1D
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Recommended Capacitor:
Nissei Denki’s MKT-series R40 (1 F)
The output terminal side of the G3NA-D210B is connected to a built-
in diode for protecting the SSR from damage that may result from
reverse connection. The SSR, however, cannot withstand one min-
ute or more if the wires are connected in reverse order. Therefore,
pay the utmost attention not to make polarity mistakes on the load
side.
Input
G3NA-UTU
Output
Load
G3NA