MSP430-P2274 Olimex Ltd., MSP430-P2274 Datasheet - Page 7

• Manufacturer Part Number: MSP430-P2274
• Description: MCU, MPU & DSP Development Tools HDR BRD FOR MSP430F2274
• Manufacturer: Olimex Ltd.

Specifications of MSP430-P2274

• Tool Type: Development Kit
• Core Architecture: MSP430
• Cpu Core: MSP430
• Data Bus Width: 16 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Power Out jumper:
Note:
SDA/P1.2
SCL/P1.1
INPUT/OUTPUT
Give user choice to select UEXT SDA connection between P1.2 or MOSI/SDA.
Default state is P1.2.
Give user choice to select UEXT SCL connection between P1.1 or MISO/SCL.
Default state is P1.1.
connector. When this jumper cap is placed, the power supply of JTAG
connector will follow the power supply of the board. This is useful when
your board works at lower than +3,3V power supply.
P_IN and P_OUT jumper caps should not be placed at the same time.
Status LED1 (yellow) with name LED1 connected to MSP430F2274 pin 27
(P3.6/A6/OA0I2).
Status LED2 (green) with name LED2 connected to MSP430F2274 pin 28
(P3.7/A7/OA1I2).
Power-on LED (red) with name PWR – this led shows that +3.3V is applied to the
board.
User button with name BUT1 connected to MSP430F2274 pin 31
(P1.0/TACLK/ADC10CLK).
User button with name BUT2 connected to MSP430F2274 pin 34 (P1.3/TA2).
P_OUT jumper connects power from MSP430-5438STK to JTAG
Page 7