B43252B2108M000 EPCOS Inc, B43252B2108M000 Datasheet - Page 23

• Manufacturer Part Number: B43252B2108M000
• Description: Aluminum Electrolytic Capacitors - Snap In 200volts 1000uF 35x35mm
• Manufacturer: EPCOS Inc
• Series: B43252r

Specifications of B43252B2108M000

• Operating Temperature Range: - 40 C to + 105 C
• Diameter: 35 mm (1.38 in)
• Length: 35 mm (1.38 in)
• Product: General Purpose Electrolytic Capacitors
• Dissipation Factor Df: 0.12
• Load Life: 2000 Hrs
• Termination Style: Snap In
• Capacitance: 1000 uF
• Tolerance: 20 %
• Voltage Rating: 200 Volts
• Ripple Current: 2.53 mAmps
• Lead Spacing: 10 mm (0.39 in)
• Number Of Pins: 2
• Test Frequency: 120 Hz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

11
12
13
Please read Cautions and warnings and
Important notes at the end of this document.
Cautions and warnings
Do not apply excessive force to the leads and terminals. Do not move the capacitor after sol-
dering it onto the PC board and do not carry the PC board by gripping the capacitor. Observe
the following rules to prevent undue stress to the capacitor:
a Do not tilt or bend the capacitor after soldering.
b Ensure that the terminal spacing matches the corresponding hole spacing on the PC
The aluminum case is not insulated from the cathode. Do not place a conductor under the
aluminum capacitors on the PC board as this may cause a short circuit. The case and top of
capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink
sleeve to ensure safe usage.
The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing.
board.
23
04/08