DE2E3KY222MA2BM01 Murata, DE2E3KY222MA2BM01 Datasheet - Page 2

• Manufacturer Part Number: DE2E3KY222MA2BM01
• Description: Ceramic Disc Capacitors Class X1 Y2 2200pF 250Vac E 20%
• Manufacturer: Murata
• Series: DEr
• Type: Ceramic Discr

Specifications of DE2E3KY222MA2BM01

• Voltage Rating: 250 Volts
• Operating Temperature Range: - 25 C to + 125 C
• Termination Style: Radial
• Product: Ceramic Disc Capacitors - Other Various
• Dimensions: 8 mm Dia.
• Capacitance: 2200 pF
• Tolerance: 20 %
• Temperature Coefficient: E
• Lead Spacing: 5 mm
• Tolerance (+ Or -): 20%
• Voltage: 250VAC
• Temp Coeff (dielectric): E
• Operating Temp Range: -25C to 125C
• Mounting Style: Through Hole
• Package / Case: Not Required
• Construction: Radial
• Lead Spacing (nom): 5mm
• Product Length (mm): Not Requiredmm
• Product Depth (mm): 5mm
• Product Height (mm): Not Requiredmm
• Product Diameter (mm): 8mm
• Lead Diameter (nom): 0.6mm
• Seated Plane Height: 11mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

No.
10
11
12
13
*
*
9
1
2
"C" expresses nominal capacitance value (pF).
"Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued from the preceding page.
Soldering
Effect
(Non-Preheat)
Soldering
Effect
(On-Preheat)
Vibration
Resistance
Humidity
(Under
Steady
State)
Humidity
Loading
Safety Standard Certified Type KY/KH/KX Specifications and Test Methods
Item
Appearance
Capacitance
Change
I.R.
Dielectric
Strength
Appearance
Capacitance
Change
I.R.
Dielectric
Strength
Appearance
Capacitance
D.F.
Q
Appearance
Capacitance
Change
D.F.
Q
I.R.
Dielectric
Strength
Appearance
Capacitance
Change
D.F.
Q
I.R.
Dielectric
Strength
No marked defect
Within ±10%
1000MΩ min.
Per Item 6
No marked defect
Within ±10%
1000MΩ min.
Per Item 6
No marked defect
Within the specified tolerance
No marked defect
3000MΩ min.
Per Item 6
No marked defect
3000MΩ min.
Per Item 6
Char.
Char.
Char.
Char.
Char.
B, E
E, F
B, E
E, F
B, E
SL
SL
SL
SL
SL
F
B
F
B
F
QU275+5/2C*
QU350
QU275+5/2C*
QU350
QU400+20C*
QU1000
Capacitance Change
Capacitance Change
Specifications
Specifications
Specifications
Specifications
Within ±10%
Within ±15%
Within ± 5%
Within ±10%
Within ±15%
Within ± 5%
D.F.V2.5%
D.F.V5.0%
D.F.V5.0%
D.F.V7.5%
D.F.V5.0%
D.F.V7.5%
1
1
1
(CF30pF)
(CU30pF)
(CF30pF)
(CU30pF)
(CF30pF)
(CU30pF)
As shown in the figure, the lead
wires should be immersed in
solder of 350±10°C or 260±5°C up
to 1.5 to 2.0mm from the root of
terminal for 3.5±0.5 sec. (10±1
sec. for 260±5°C).
Pre-treatment:
Post-treatment:
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Then, as in the figure, the lead
wires should be immersed in
solder of 260+0/-5°C up to 1.5 to
2.0mm from the root of terminal
for 7.5+0/-1 sec.
Pre-treatment:
Post-treatment:
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10Hz to 55Hz and back to 10Hz.
Apply for a total of 6 hrs., 2 hrs. each in 3 mutually
perpendicular directions.
Set the capacitor for 500±12 hrs. at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Apply the rated voltage for 500±12 hrs. at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition*
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Capacitor should be stored at 85±2°C for 1 hr., then placed at
room condition*
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Capacitor should be stored for 1 to 2 hrs. at room condition.*
2
2
for 24±2 hrs. before initial measurements.
for 24±2 hrs. before initial measurements.
Test Method
Continued on the following page.
Thermal
Screen
Thermal
Screen
Capacitor
Capacitor
Molten
Solder
Molten
Solder
1.5
to 2.0mm
1.5
to 2.0mm
2
2
2
2