2673021801 Fair-Rite, 2673021801 Datasheet - Page 41

• Manufacturer Part Number: 2673021801
• Description: EMI/RFI Suppressors & Ferrites Z=94ohms @ 10MHz
• Manufacturer: Fair-Rite

Specifications of 2673021801

• Shielding: Unshielded
• Test Frequency: 100 MHz
• Product: Ferrite Beads
• Impedance: 95 Ohms
• Operating Temperature Range: - 55 C to + 125 C
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

14th Edition
P.O. Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) FAIR RITE / [phone]
Surface mount beads and common-mode surface mount beads are available from Fair-Rite in
several sizes. Their rugged construction decreases dc resistance and increases current carrying
capacity compared with plated beads.
The Common-Mode surface mount bead provides a common path for the magnetic flux generated
by the current to the load and the return current from the load. The current compensation results in
zero magnetic flux in the core.
• 12mm taped SM Beads are supplied taped and reeled per EIA Standard 481-1-A and IEC 60286-3. 16mm and 24mm
• Parts can also be supplied not taped and reeled and then are bulk packed.
• The copper conductors have a 300 m inch thickness tin/lead coating.
• SM Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208. After dipping the
• After preheating the beads to within 100
• Suggested land patterns are in accordance with the recommendations of “Surface Mount Land Patterns
• SM Beads are controlled for impedance limits only. They are tested for impedance with a single turn, using a Hewlett
• Recommended storage and operating temperature is –55
• For impedance vs. frequency curves and DC bias curves for these parts, see Figures 7-21.
• Common-mode beads can withstand a minimum breakdown voltage of 500VDC.
• For any SM bead requirement not listed in the catalog, please contact our customer service group for
• The Surface Mount Bead Kit (part number 0199000025) is available for prototype evaluation. See page 92.
• The maximum current rating for these beads is 5 amps.
taped SM Beads are supplied taped and reeled per EIA Standard 481-2-A and IEC 60286-3. Taped and reeled parts are
supplied on a 13” reel.
This packing method will change the last digit of the part number to a “6”.
mounting side of the bead, the solder surface shall be at least 95% covered with a smooth solder coating. The edges of the
copper strip are not specified as solderable surfaces.
requirements of EIA-186-10E, temperature 260±5
(Configuration and Design Rules) ANSI/IPC-SM-782”.
Packard HP 4191A RF Impedance Analyzer with spring clip fixture HP 16092A.
availability and pricing.
[phone]
o
C of the soldering temperature, the parts meet the resistance to soldering
• FAX: (888) FERRITE / [phone] • www.fair-rite.com • E-Mail: [e-mail]
o
C and time 10±1 seconds.
[phone]
o
C to 125
Fair-Rite Products Corp.
o
Note: (914) Area Code has changed to (845).
C.
SM Beads
41