1309G2 Anderson Power Products, 1309G2 Datasheet - Page 2

• Manufacturer Part Number: 1309G2
• Description: Heavy Duty Power Connectors TOOL FOR PP15/45 20-12AWG
• Manufacturer: Anderson Power Products
• Series: PP15/45 Seriesr

Specifications of 1309G2

• Product Type: Tools
• Size: 6.0 to 2.0 mm
• Tool Type: Crimp Tool
• Wire Size: 20-12 AWG
• Crimp Size: 20AWG To 12AWG
• Crimp Tool: Hand Crimp Tool
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Anderson Crimp Terminals

ASSEMBLY
1.
TERMINATION
2.
Strip wire to "X" dimension (Figure 1) taking care to avoid knicking or cutting of wire strands. Do not
bend or twist strands too sharply.
Manufacturer recommends termination by crimping.
a.
b.
1395 Series
1330 Series
1345 Series
1300 Series
1320 Series
1380 Series
Numbers
Crimped
1300, 1320 and 1380 series contacts accept largest wire sizes rated. Smaller wire sizes
require reducing bushings, Cat. Numbers 1395, 1330 and 1345 do not require reducing
bushings. Insert wire to the base of contact, then crimp. Note: indentation should fall in
the middle of the barrel (see Fig. 2). Use recommend crimp tools only. Crimping by
other means may disturb contact position in housing and/or produce high resistance
joints.
Soldered
Melt rosin flux tin solder into contact well, do not solder-dip contacts or overload the
joint with solder. On 1395, 1330 and 1345 Series contacts, solder flow should not extend
beyond contact wall. On all models, care should be taken that no solder adheres to
contact surfaces.
Catalog
15
30
45
75
120
180
amps
5/16
5/16
5/16
9/16
15/16
1 - 1/8
Inches
"X"
7.9
7.9
7.9
14.5
24.0
28.6
Millimeters
"X"
Figure 1