FLS.01.250.DLAE24 LEMO, FLS.01.250.DLAE24 Datasheet - Page 43

• Manufacturer Part Number: FLS.01.250.DLAE24
• Description: RF Connectors Plug 90 deg. Crimp 50 Ohm Coax
• Manufacturer: LEMO

Specifications of FLS.01.250.DLAE24

• Features: IP rating 50
• Housing Material: Brass
• Mounting Angle: Straight
• Rf Series: FLS
• Product: Various Connectors
• Gender: Male
• Polarity: Normal
• Shell Plating: Gold
• Impedance: 50 Ohms
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Terminating of plugs and straight sockets with cable crimping (solder contact)
www.lemo.com
Straight plug
Free socket
Fixed socket
nut fixing
Solder
Solder
T ± 0.2
S ± 0.2
L ± 0.2
4
4
4
3
3
1.
2.
2.1 Place the crimp ferrule ➀ on the cable. Widen the shield braid.
2.2 Solder the conductor through the hole.
2.3 Slide the crimp ferrule ➀ onto the shield until it rests against
2.4 Slide the assembly into the connector shell ➃ and screw
Note: these terminating instructions apply to the following models:
1-2-3-4-8
Cable
group
Cable preparation
First place the bend relief (if to be used) on the cable.
Strip the cable according to dimensions below.
Cable terminating
Slide the subassembly ➁ over the cable until the insulator rests
against the dielectric and the cable conductor is visible through
the contact solder hole.
the crimp backnut of the subassembly ➁.
Crimp with the LEMO crimping tool using the hexagonal opening
(see “Tooling” on page 37).
Slide the insulator ➂ onto the subassembly ➁.
it onto the subassembly ➁. Tighten using the appropriate tool
to a torque of 0.25 Nm (see tooling on pages 35, 36 and 37).
Push the bend relief (if used) onto the crimp ferrule.
6-7
2
2
M5 = FFS, FFV
T
5
5
M5
12
12
S
17
19
M5
L
1
®
41
®