JWLW21RA1A NKK Switches, JWLW21RA1A Datasheet - Page 6

• Manufacturer Part Number: JWLW21RA1A
• Description: Rocker Switches & Paddle Switches High In-rush Rated Rocker Switch
• Manufacturer: NKK Switches
• Series: JWr

Specifications of JWLW21RA1A

• Contact Form: DPST
• Contact Rating: 16 Amps at 125 VoltsAC, 250 VoltsAC
• Actuator: Rocker, with Barrier
• Mounting Style: Panel
• Terminal Seal: Epoxy
• Contact Plating: Silver
• Cap Color: Black
• Switch Function: ON - NONE - OFF
• Termination Style: Solder Lug, Quick Connect
• Featured Product: JWLW Series 16A Rocker Switches
• Circuit: DPST
• Contact Rating @ Voltage: 16A @ 125VAC
• Illumination: Non-Illuminated
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Mounting Type: Panel Mount, Snap-In
• Panel Cutout Dimensions: 30.70mm x 20.50mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Series JWLW
6
Operating Environment
• Do not install switch where heavy dust collection occurs. Dust build-up under rocker may affect switch actuation.
• Do not actuate switch if submerged in water or oil.
• Installation is not recommended on horizontal surface in an
Panel Mounting
• Before snapping a switch into the panel,
• When mounting into a panel, apply equal pressure
• After mounting a switch, be sure there are no gaps between switch and panel. Lightly push into panel.
• After installing into panel, do not apply excessive force.
• After panel installation and wiring is completed, do not apply force horizontally or vertically from behind panel.
• Behind the panel, cut area should be squared. If front of panel is painted, do not allow
• Avoid reinstalling a switch once it has been mounted in a panel. This may cause
environment where frequent splashing of water may occur.
In such an environment, a minimum 30° angle installation
is advisable. If there is a possibility of freezing, install
vertically so no moisture will be retained within switch housing.
align the gasket evenly under bezel of
the switch.
to sides of bezel and insert parallel to the panel.
any paint to collect in corners of cutout to prevent level mounting.
deterioration of panel sealability.
PRECAUTIONS FOR HANDLING & STORAGE
Panel Seal Rockers
www.nikkaiswitches.com • Nihon Kaiheiki • Phone [phone] • Fax [phone]
Nihon Kaiheiki Ind. Co., Ltd.
715-1 Unane, Takatsu-ku, Kawasaki-shi, 213-8553 Japan
www.nikkaiswitches.com
Gasket position must be even and without gaps beneath the bezel
Incorrect
E-mail: [e-mail]
Incorrect
Secure and flush against bezel
Correct
Clean Edges
30°