1668-18S Techspray, 1668-18S Datasheet - Page 4

• Manufacturer Part Number: 1668-18S
• Description: Chemicals Contact Cleaner II, 18 oz aerosol
• Manufacturer: Techspray
• Type: Contactr

Specifications of 1668-18S

• Product: Cleaners & Degreasers
• Size: 18 oz
• Container: Aerosol
• Application: Non-flammable, safe on most plastics, rapidly evaporating, zero residue, non-corrosive
• Boiling Point: 54 °C
• Chemical Component: 1, 3-Dichloro-1, 1, 2, 2, 3-Pentafluoropropane/3, 3-Dichloro-1, 1, 1, 2, 2-Pentafluoropropane/Acetone/1, 1, 1, 2-Tetrafluoroethane/Carbon Dioxide (Aerosol Propellant)/Nitromethane
• Dispensing Method: Aerosol
• Evaporation: > 1
• Primary Type: Cleaner
• Special Features: Non-Flammable
• Weight: 18 Oz.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5. FIRE FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES
7. HANDLING AND STORAGE
Contact Cleaner II
NOTES TO PHYSICIAN: Because of the possible disturbances of cardiac rhythm, catecholamine drugs, such as
epinephrine, should be used with special caution and only in situations of emergency life support. Treatment of
overexposure should be directed at the control of symptoms and the clinical conditions.
FLASHPOINT AND METHOD: None : . . . . ASTM D-56 (Tag C.C.)
FLAMMABLE LIMITS: NA to NA
EXTINGUISHING MEDIA: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving this
material.
FIRE FIGHTING PROCEDURES: Use water spray to keep fire-exposed containers cool and to knock down
vapors which may result from product decomposition.
FIRE FIGHTING EQUIPMENT: As in any fire, wear self-contained breathing apparatus pressure-demand,
(MSHA/NIOSH approved or equivalent) and full protective gear.
HAZARDOUS DECOMPOSITION PRODUCTS: Toxic oxides of carbon and corrosive vapors of hydrogen
chloride.
SMALL SPILL: Contain spill with dike to prevent entry into sewers.
LARGE SPILL: If this material is released into a work area, evacuate the area immediately.
GENERAL PROCEDURES: Dike area to contain spill. Take precautions as necessary to prevent contamination
of ground and surface waters. Recover spilled material on adsorbent, such as sawdust or vermiculite, and sweep into
closed containers for disposal. After all visible traces, including vapors, have been removed thoroughly wet vacuum
the area. Do not flush to sewer. If area of spill is porous, remove as much contaminated earth, gravel, etc. as
necessary and place in closed containers for disposal.
SPECIAL PROTECTIVE EQUIPMENT: Only personnel equipped with proper respiratory and skin/eye
protection should be permitted in area. See Section 8 for details.
GENERAL PROCEDURES: Use only in a well ventilated area.
HANDLING: Use with sufficient ventilation to keep employee exposure below recommended limits. Provide
adequate ventilation for storage, handling and use, especially for enclosed or low spaces. Avoid contact of liquid
with eyes and prolonged skin exposure. Do not allow product to contact open flame or electrical heating elements
because dangerous decomposition products may form.
STORAGE: Store in a cool, well-ventilated area of low fire risk. Storage in subsurface locations should be
avoided. If container temperature exceeds boiling point, cool the container before opening.