41600A MG Chemicals, 41600A Datasheet

Chemicals ELECTROLESS COPPER PLATING CHEMICAL KIT

41600A

Manufacturer Part Number
41600A
Description
Chemicals ELECTROLESS COPPER PLATING CHEMICAL KIT
Manufacturer
MG Chemicals
Type
Copper Plating Chemical Kitr
Datasheet
1.41600A.pdf (2 pages)

Specifications of 41600A

Description/function
Electroless Copper Plating Chemical Kit
Product
Prototyping/Board Repair
Container
Jar
Includes
1 × Alkaline Cleaner, 1 × Micro Etch Part A, 1 × Micro Etch Part B, 2 × Catalyst Part A, 1 × Catalyst Part B, 1 × Accelerator, 1 × Plating Solution Part A, 1 × Plating Solution Part B and 1 × Plating Solution Part C
Special Features
Chemical Kit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Electroless Copper Plating Chemical Kit
CAT. NO. 41600A
This kit is a key component of the
engineers to prototype circuit boards with copper plated through holes themselves, avoiding having to send their
designs to prototyping companies.
In the prototyping process, after drilling and de-burring the through holes in the copper clad board, the holes must be
“activated” before they can be electroplated with a normal copper electroplating process. Through-hole activation
entails making the walls of the through holes conductive, because only conductive surfaces can be electroplated. The
electroless plating process achieves this by applying a thin layer of copper to the inside of every hole. This layer is not
sufficient to carry the circuit in the completed circuit, but it is enough to electrplate to.
Some of the chemicals in this process pose significant safety hazards and disposal challenges; and for that reason this
process is for professional use only.
See the instructions for the MG Chemicals Professional Prototyping Process
procedure.
This kit contains sufficient chemicals to plate through-holes on five 5” x 3” double sided copper clad boards (150
inches total surface area). Once mixed, solutions last for two days.
Kit Contents:
For use with,
Electroless Copper Plating Hardware
Kit
•
•
•
•
•
•
•
•
•
(Cat. No.
1 x Alkaline Cleaner (Cat. No. 41601-250ML)
1 x Micro Etch Part A (Cat. No. 41602-250ML)
1 x Micro Etch Part B (Cat. No. 40603-250G)
2 x Catalyst Part A (Cat. No. 41604-1L)
1 x Catalyst Part B (Cat. No. 41605-250ML)
1 x Accelerator (Cat. No. 41606-250ML)
1 x Plating Solution Part A (Cat. No. 41607-250ML)
1 x Plating Solution Part B (Cat. No. 41608-250ML)
1 x Plating Solution Part C (Cat. No. 41609-250ML)
41600B)
MG Chemicals Professional Prototyping Process, which allows professional electronic
to understand the entire prototyping

41600A Summary of contents

Page 1

... Electroless Copper Plating Chemical Kit CAT. NO. 41600A This kit is a key component of the engineers to prototype circuit boards with copper plated through holes themselves, avoiding having to send their designs to prototyping companies. In the prototyping process, after drilling and de-burring the through holes in the copper clad board, the holes must be “ ...

Page 2

... Nitrile Gloves This kit contains 5 tanks, one for each step in the MG Chemicals Electroless Copper Plating Process, each labeled with dilution instructions and immersion times, along with a hanging bar and hook, a package of nitrile gloves suitable for resisting the acid solutions in this process, and an air pump and tube to keep the solution in step 5 agitated. This kit is reusable. This kit is designed to be used for boards that are 5” ...