4408 1" 3M, 4408 1" Datasheet

Tapes & Mastics DOUBLE COAT 1 X108'

4408 1"

Manufacturer Part Number
4408 1"
Description
Tapes & Mastics DOUBLE COAT 1 X108'
Manufacturer
3M
Type
Foamr
Datasheet
1.4416_1_WHITE.pdf (4 pages)

Specifications of 4408 1"

Size
1 in x 36 yds
Description/function
Double coated vinyl foam tapes
Color
Black
Length, Tape Roll
36 Yd.
Thickness, Tape
1⁄8 in.
Width, Tape
1⁄4 in. (Min.)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
2120003291
Double Coated Vinyl Foam Tapes
4432
Product Description
Construction
Technical Data
•
4416
•
Products
Adhesive Type:*
Adhesive Carrier:
Thickness: Nominal
Tape Color:
Release Liner:
Approximate Density:
Foam only
Tape 4432
Tape 4416
Tape 4408
*Adhesive 430 is a firm acrylic pressure sensitive adhesive which features both high initial
4408
adhesion and good high temperature holding power.
lb./ft.
(kg/m
3
3
)
Tolerance
1/32 in. (0.8 mm) Double-Coated Vinyl Foam Tape
1/16 in. (1.6 mm) Double-Coated Vinyl Foam Tape
1/8 in. (3.2 mm) Double-Coated Vinyl Foam Tape
0.025-0.040 in.
(0.64-102 mm)
Black or White
Tape 4432
(0.8 mm)
0.031 in.
1/32 in.
(560)
35
Closed Cell Polyvinyl Chloride Foam
62# Densified Kraft
Green Plaid Paper
(1.14-2.03 mm)
0.045-0.080 in.
Black or White
Tape 4416
(0.08 mm)
0.0625 in.
(1.6 mm)
0.003 in.
1/16 in.
(320)
430
20
(Supersedes September, 1998)
December, 2000
(2.29-3.81 mm)
0.110-0.150 in.
Tape 4408
Black Only
(3.2 mm)
0.125 in.
1/8 in.
(320)
20

4408 1" Summary of contents

Page 1

... Double-Coated Vinyl Foam Tape 1/16 in. (1.6 mm) Double-Coated Vinyl Foam Tape 1/8 in. (3.2 mm) Double-Coated Vinyl Foam Tape Tape 4432 1/32 in. 0.031 in. ...

Page 2

... Double Coated Vinyl Foam Tapes 4432 4416 • 4408 • Note: The following technical information and data should be considered representative Typical Physical Properties and Performance Characteristics Products Normal Tensile: (T-Block in. (6. Jaw Speed 2"/min. (50 mm/min.) 72°F Static Shear: (As measured by static shear weight held for 100 hr ...

Page 3

... Double Coated Vinyl Foam Tapes 4432 4416 • 4408 • Application Techniques • Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. • To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or heptane. Note: Be sure to follow manufacturer’ ...

Page 4

... M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability. This Bonding Systems Division product was manufactured under a 3M quality system registered to ISO 9002 standards. 3 Bonding Systems Division 3M Center, Building 220-7E-01 St ...