70HDT 3M, 70HDT Datasheet - Page 4

• Manufacturer Part Number: 70HDT
• Description: Tapes & Mastics SILICONE HD 1 X30'
• Manufacturer: 3M
• Type: Electricalr

Specifications of 70HDT

• Product: Tape
• Size: 1 in x 30 ft
• Description/function: Electrical Tape
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 5112857262

3M and “Scotch” are trademarks of 3M.
7.0
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will
be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/elpd
Installation Techniques
Scotch 70 Silicone Rubber Electrical Tape
should be applied in half-lap layers using
moderate tension.
70 Tape should be applied on all tape-like
terminations which will be operated either
outdoors or in areas subjected to
contamination or moisture. The following
procedure should be used:
If possible, connect the termination to its
final position. Otherwise, take care not to
damage the final overwrap of silicone tape
during installation. Overwrap the end seal
with several half-lapped layers. Overwrap
the entire termination with one additional
half-lapped layer. For upright termination,
begin from one inch on cable jacket and end
at the lug. For inverted termination, end
taping on the cable jacket. Wrap with
moderate tension (10 to 100% elongation).
Apply last lap with zero stretch. Press down
to avoid endlifting before fusion takes place.
70 Tape can also be applied over the
exposed cable insulation and/or end seal
used in conjunction with molded (slip-on)
stress cones.
Techniques for the proper use of 70 Tape are
contained in standard and special prints
available through the 3M Systems for
Splicing and Terminating Program. This
material may be obtained through your local
3M Electro-Products Division
representative.
8.0
9.0
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any loss or damage arising from this 3M product,
whether direct, indirect, special, incidental or consequential
regardless of the legal theory asserted.
NOTE REGARDING LINER REMOVAL:
To separate the liner from the tape when
starting a new roll, simply stretch the liner
and tape until the silicone tape breaks. The
liner will then separate at this point.
Shelf Life
Scotch 70 Tape has a 5-year shelf life (from
the date of manufacture) when stored under
the following recommended conditions. Store
behind present stock in a clean dry place at a
temperature of 70°F and 40 to 50% relative
humidity. Prolonged exposure to
temperatures in excess of 49°C (120°F) can
cause a loss of fusion in the tape. Proper
stock rotation is recommended.
Availability
Scotch 70 Self-Fusing Silicone Rubber
Electrical Tape is available from your
electrical distributor in 1-inch by 30-foot
rolls.
If this product is defective within the warranty period
©3M IPC 2001 78-8126-0479-7-A
Litho in USA