HR30-8P-T02 Hirose Electric Co Ltd, HR30-8P-T02 Datasheet - Page 10
![Crimping, Stripping, Cutting Tools & Drills TIGHTENING COLLAR 10P, 12P BACKSHELL](/photos/18/16/181627/hr30-6p-t02_sml.jpg)
HR30-8P-T02
Manufacturer Part Number
HR30-8P-T02
Description
Crimping, Stripping, Cutting Tools & Drills TIGHTENING COLLAR 10P, 12P BACKSHELL
Manufacturer
Hirose Electric Co Ltd
Type
Tightening Collarr
Datasheet
1.HR30-6R-C71.pdf
(12 pages)
Specifications of HR30-8P-T02
Product
Tool Component
Description/function
Tightens backshell to specified torque
Fits Cable/wire
26-30 AWG
Wire Gauge Min (awg)
26
Wire Gauge Range
26-30
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
10P, 12P backshell
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
10
BAssembly Procedures
1
2
Thread the back shell, strain relief, seal bushing, spring and push/pull locking collar over the cable as shown above.
Solder type
1. Pre-solder the exposed cable conductors (dia. A). The diameter of the pre-soldered conductors should not exceed 0.7
2. Insert the insulator body over the applicable solder termination fixture.
3. Insert the pre-soldered conductors in the contact soldering pot and solder them in place.
Crimp type
1. Crimp the applicable contact to the stripped conductor. Use correct crimp tools. Verify the dimensions and crimp
2. Insert the contact into the appropriate opening in the insulator body.
3. Verify fully seated position by applying a slight pull force on the conductor. The contact should remain in place.
mm for 6 contact plug and 1.0 mm for 3 contact plug.
Soldering iron temperature should be
configuration.
Re-insert if not seated.
Plug Assembly Sequence
applied for 3-4 second.
Solder type : 3 and 6 pos.
Solder type : 12 pos.
Crimp type : 10 and 12 pos.
2
2 mm
2 mm
-0
-0.5
A
mm
5.5 mm max.
15
10 mm max.
B
20 mm