234 GREENLEE TEXTRON, 234 Datasheet - Page 65

• Manufacturer Part Number: 234
• Description: Punches & Dies PUNCH UNIT D-SUB 37P
• Manufacturer: GREENLEE TEXTRON
• Type: Punch Kitsr

Specifications of 234

• Shaft Diameter: 9.5mm
• Length: 63.4mm
• Punch Tool Type: Panel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, na

Caulking Anchors
Drop Anchors
Zinc Mushroom Head Drive Anchors
1. Drill hole in
to set aNchor flush With surfaces
to set aNchor beloW surfaces
1. drill hole deeper than anchor length. Thread bolt into anchor. Hammer anchor into hole
noTe: The use of a 24 to 40 ounce hammer is recommended for expanding the anchor.
1. Drill hole the same
1. Drill required diameter
www.greenlee.com
masonry.
until bolt head is at desired height. Remove bolt and set anchor with setting tool.
= ReplacemenT paRT
diameter as anchor
being used.
hole in material, to a
minimum depth equal
the overall anchor
minus the thickness
of the object to be
fastened. Clean hole.
2. Insert anchor,
conical end first,
until flush
with surface.
= accessoRy
2. Drive anchor flush
with concrete.
2. Insert anchor body
through object to be
fastened, and into the
hole in base material.
3. Using setting tool,
caulk lead outer
sleeve with sharp
blows. Position
fixture.
3. Expand anchor with setting tool
provided. Anchor is properly
expanded when shoulder of
setting tool is flush with top
of anchor.
3. Tap the nail until it is
flush with the zinc
anchor head.
4. Insert screw
or bolt and
tighten.
• Zinc alloy and lead caulking anchor can be set flush or subset.
• Rustproof, use interior or exterior.
• For setting in hollow block. To set anchors all same depth,
• Heavy-duty steel anchor for use where codes require all steel bolt anchors.
• Pre-assembled, internal expander plug for faster installation.
• Four-way slot design assures firm hold.
lead caulkiNg aNchors aNd settiNg tools
*One Setting Tool included with each box of anchors.
Approvals: Conforms to the description in Federal Specification FFS-325, Group I, Type 1, Class 1.
NOTE: Working load is one fourth the ultimate/maximum capacity. For critical or unusual applications, site testing is recommended.
drop aNchors aNd settiNg tools
*One Setting Tool included with each box of anchors.
specificatioNs
Approvals: Conforms to the description in Federal Specification FFS-325, Group VIII,
Type 1, for concrete expansion shield anchors.
NOTE: Working load is one fourth the ultimate/maximum capacity.
For critical or unusual applications, site testing is recommended.
• Fast, medium-duty anchor for use in concrete, block and brick.
• No hole spotting.
• Use in hollow or solid material.
• Made of zinc and steel.
NOTE: For critical or unusual applications, site testing is recommended.
cat./
upc No.
84299 1/4"–20 1/2"
84305 3/8"–16 3/4"
cat./
upc No.
84253
84256
cat./upc No.
84253
84256
cat./
upc No.
84110
84111
84112
Greenlee setting tool required.
use Greenlee screw anchor expander.
thread
size
aNchor &
hole dia. thread size depth depth
3/8"
1/2"
size
1/4" x 1"
1/4" x 1-1/4"
1/4" x 1-1/2"
dia. MiN. depth tool* per box lbs.
reQ. hole
WorkiNg load pullout
1-1/4"
lbs.
1037
1712.5
1/4"–20
3/8"–16
7/8"
bolt
84329
84335
reQuired
hole size
1/4"
1/4"
1/4"
set
1-1/8"
1-5/8"
MiN.
kg
469.8
775.8
100
Qty.
50
thread settiNg
1/2"
5/8"
3.8
7.1
Qty
per box
100
100
100
Weight
WorkiNg load shear
84273
84276
tool*
1.7
3.2
lbs.
842.5
1518.7
kg
WorkiNg load pullout
312.5
per box lb. kg
lbs.
125
lbs.
2
2.4
2.6
Qty.
100
50
Weight
kg
381.7
688.9
Weight
141.6
3
7
56.6
kg
kg
.9
1.1
1.2
1.4
3.2
103