MX-W1AV OK International, MX-W1AV Datasheet - Page 7

• Manufacturer Part Number: MX-W1AV
• Description: Soldering Tools WORKSTAND FOR METCAL ADV AND ULTRAFINE HP
• Manufacturer: OK International
• Type: Workstands Upgrade Kitr

Specifications of MX-W1AV

• Maximum Temperature: + 55 C
• Description/function: Workstand upgrade kit
• Product: Soldering Stations
• Size: 8.6 cm x 19.1 cm x 8.3 cm
• Watts: 80 W
• Brand/series: Metcal
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Metcal MX-5000 Series

Chisel Cartridges
Optimizing Results with Proper Geometry Selection
Selecting the correct cartridge geometry is extremely important to ensure high levels of heat transfer efficiency.
To optimize the soldering process and to take better advantage of your soldering system's available power, always consider
using tip geometries with the largest possible contact area. While long, small diameter, pointed tips are attractive for limited
access to components, they may not promote heat transfer to the soldering joint as well as short, blunt-faced geometries.
This guide shows the selection of cartridges available for the Metcal MX-5000 Soldering, Desoldering and Rework Systems.
Metcal offers a comprehensive range of cartridges for production soldering, touch-up soldering, pad clean-up,
SMD component, and through-hole desoldering.
STTC Power Cartridges
Power cartridges are optimized for power delivery, ideal for high thermal demand applications including lead-free soldering
processes and high mass substrates and components. These cartridges are designed with tip geometries to promote
thermal transfer resulting in significant performance improvement.
STTC-x45P
STTC-x01P
STTC-x25P
STTC-x38P
STTC-x37P
STTC-x47P
STTC-x36P
STTC-x173P
The following tips should be selected based on the work area to be soldered. Where possible the tip selected should deliver
maximum contact to the work area and have as short a taper as possible for good thermal transfer. Long tapered and bent
tips should only be selected where accessibility is limited.
STTC-x25*
STTC-x38*
STTC-x37*
STTC-x36*
STTC Cartridges provide a wide range of soldering geometrics for through-hole and SMD rework.
For use with the MX-RM3E and the Metcal Advanced
Cartridge, Conical, 0.4mm (0.016")
Cartridge, Conical, 1mm (0.04")
Cartridge, Chisel, 1mm (0.04"), 30°
Cartridge, Chisel, 1.5mm (0.06"), 30°
Cartridge, Chisel, 1.78mm (0.07"), 30°
Cartridge, Bevel, 1.78mm (0.07"), 60°
Cartridge, Chisel, 2.5mm (0.1"), 30°
Cartridge, Knife, 5mm (0.2")
Cartridge, Chisel, 1mm (0.04"), 30°
Cartridge, Chisel, 1.35mm (0.053"), 30°
Cartridge, Chisel, 1.78mm (0.07"), 30°
Cartridge, Chisel, 2.5mm (0.1"), 30°
NOTE: where indicated with an *, there is a power cartridge version which can improve performance.
TM
Hand-piece (MX-H1-AV).
5.0mm
0.20"
1.0mm
0.04"
0.016"
1.8mm
1.78mm
.10"
0.055"
1.4mm
0.07"
0.07"
.06"
1.5mm
2.5mm
.04"
0.4mm
0.04"
.07"
1.78mm
0.10"
1.0mm
1.0mm
45°
2.5mm
13.2mm
0.52"
8.5mm
9.9mm
0.34"
6.5mm
9.1mm
9.9mm
.39"
9.9mm
0.25"
6.0mm
6.0mm
6.0mm
.36"
.39"
6.0mm
.39"
0.24"
0.24"
0.24"
0.24"
6.4mm
0.25"
06