CW2400 Chemtronics, CW2400 Datasheet - Page 2

• Manufacturer Part Number: CW2400
• Description: Soldering Tools .25OZ SILVER EPOXY
• Manufacturer: Chemtronics
• Type: Conductive Epoxy Kitr

Specifications of CW2400

• Chemical Component: Modified Aliphatic Amine/Silver (Metallic)
• Flash Point: +200
• Odor: Mild
• Physical State: Silver⁄Gray Paste
• Primary Type: Coating
• Size: 14 gm Syringes
• Special Features: Repair
• Specific Gravity: 4.0
• Temperature, Rating: -91 to +100 °C
• Weight: 0.25 Oz.
• Description/function: Epoxy for precision repairs and high-strenght conductive bonding
• Product: Soldering Accessories
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

COMPATIBILITY
CircuitWorks
generally compatible with most materials
used in printed circuit board fabrication. As
with any adhesive/sealant, compatibility
with substrate should be determined on a
non-critical area prior to use.
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
Cleaning: For best results, clean the board
with one of Chemtronics
Pow-R-Wash
any surface contamination which may
prevent adequate material contact.
Mixing:
weight or volume of Part A and Part B. Mix
thoroughly for 2 minutes and apply within 8
minutes.
Thinning: Do not attempt to thin.
Curing:
conductivity
temperature.
maximum conductivity and adhesion, cure
the bond between 150-250°F (65-121°C) for
5-10 minutes. CircuitWorks
Epoxy can be room temperature cured at or
above 75°F (25°C), for 4 hours. Maximum
conductivity and bond strength are achieved
in 24 hours. Curing at temperatures below
75
conductivity and adhesion.
Pot Life: 8-10 Minutes at 75°F (25°C) after
mixing.
°
F (25°C) will result in a loss of
Mix equal amounts (1:1) by
Curing times and electrical
®
®
cleaners in order to remove
For fastest curing times,
depend
Conductive
®
Electro-Wash
primarily
®
Epoxy
Conductive
®
on
or
is
AVAILABILITY
CW2400
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to
CHEMTRONICS
of the data and assumes no liability in connection
with damages incurred while using it.
evaluate
7g/ 0.25 oz. Adhesive &
7g/ 0.25 oz. Hardener
and
®
does not guarantee the accuracy
use
the
data
properly.