CW2200MTP Chemtronics, CW2200MTP Datasheet - Page 2

• Manufacturer Part Number: CW2200MTP
• Description: Soldering Tools MICRO-TIP PEN
• Manufacturer: Chemtronics
• Type: Conductive Pensr

Specifications of CW2200MTP

• Boiling Point: 259 to 378 °F
• Chemical Component: Acrylic Resin/Ethylene Glycol Monobutyl Ether Acetate/n-Butyl Acetate/Propylene Glycol Methyl Ether Acetate/Silver
• Dispensing Method: Pen
• Flash Point: 76 °F (TCC)
• Hydrolytic Stability: Stable
• Pressure, Vapor: 5 to 6 mmHg @ +20 °C
• Primary Type: Coating
• Special Features: Repair
• Specific Gravity: 1.8 to 2.0
• Temperature, Rating: +205 °C
• Time, Setting: <2mm/hr.
• Weight: 0.3 Oz.
• Maximum Temperature: + 400 F
• Description/function: Draws highly conductive silver traces, jumpers and shielding
• Product: Soldering Accessories
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
Cleaning: For best adhesion, clean board with one
of Chemtronics Electro-Wash
solvents
contamination which may prevent adequate material
contact.
Mixing: Although this system has been formulated
to resist hard-packing, it should be shaken
vigorously for 30 seconds to insure the proper
dispersion of the silver flakes. If pen has been
allowed to sit idle for a long period of time, the
mixing ball may seize in the barrel. To free the ball
use force to tap the barrel end of the pen until the
ball begins to move inside the pen.
Application:
through
Squeezing the pen body while pressing down on the
surface will allow the material to flow, enabling the
trace to be drawn. Practice with the pen before
attempting detail work.
material may be applied by brushing, banding, or
automatic dispensing equipment.
Thinning: The conductive ink has been optimized
for the CircuitWorks
is not normally necessary. However, Butyl Acetate
may be added with thorough mixing to make slight
adjustments for ease of application in the bulk form.
Clean-up/Removal: The conductive ink may be
cleaned or removed using a strong organic solvent
such as Chemtronics
Curing:
temperature.
within 30 minutes. Heat cure for 5 minutes at 250
to 300°F (120 to 150°C) for maximum conductivity,
durability and chemical resistance.
the
in
Tack-free in 3 to 5 minutes at room
order
CircuitWorks
The conductive ink is dispensed
Achieves electrical conductivity
®
®
Electro-Wash
Conductive Pen and thinning
to
The bulk form of this
remove
®
®
Conductive
or Pow-R-Wash
®
PX.
any
surface
Pen.
®
Soldering: Low temperature soldering is possible
to the heat-cured silver conductive traces if done at
350°F (177°C) for <5 seconds.
AVAILABILITY
CW2200STP 8.5 g (0.3 oz.), Standard Tip Pen
CW2200MTP 8.5g (0.3 oz.), Micro Tip Pen
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS
of the data and assumes no liability in connection
with damages incurred while using it.
®
does not guarantee the accuracy
ITW