MFR-SDX OK International, MFR-SDX Datasheet

no-image

MFR-SDX

Manufacturer Part Number
MFR-SDX
Description
Soldering Tools MFR Solder/De-Solder (External Air) Sys.
Manufacturer
OK International
Type
External Air desolder Systemsr
Datasheets
1.MFR-DSI.pdf (2 pages)
2.MFR-DSI.pdf (4 pages)

Specifications of MFR-SDX

Description/function
Desolder system - external air
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Versatile Pencil and Pistol Grip Combination Hand-
piece System
The MFR Desoldering Systems provides superior thermal transfer to the joint, effectively reflowing
the solder and then quickly and efficiently removing all solder. SmartHeat technology makes
through-hole Desoldering easy and safe from board damage. The state-of-the-art hand-piece can be
adjusted from a pencil to a gun with a simple press of a button. Operators can find the most
comfortable and efficient position to tackle the rework challenge. The paper solder collection
chamber and filter system is quick and easy to change, and provides low cost maintenance.
Two MFR Desoldering Systems are available. The MFR-DSX system requires shop air for desoldering.
If shop air is not available, the MFR-DSI features an internal vacuum pump
Part No.
MFR-DSX
MFR-DSI
INCLUDES
MFR-PS2X
MFR-PS2K
MFR-HDS
Description
Desolder System, External Air
Desolder System, Internal Air Pump
Two Port Universal Voltage Power Supply, External Air (MFR-DSX only)
Two Port Universal Voltage Power Supply, with Internal Air Pump (MFR-
DSI only)
Desolder Hand-piece
MFR DESOLDER SYSTEMS
MFR-DSI, MFR-SDI, MFR-DSX, MFR-SDX
Ambient Operating
Maximum Enclosure
Input Line
Input Line
Power
Output Power:
50 Watts max. at 22°C ambient temperature
Output
Power Cord
Power Supply Dimensions w x d x h:
170mm x 200mm x 152.5mm (7" x 8" x 6")
Agency Tested
CFR Part 15
Tip-to-Ground
Tip-to-Ground
Idle Temperature
Hand-piece Cable Length:
L=71cm (48"), burn proof, ESD safe
Connector:8-pin power connector
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
Recommended Air Pressure
Consumption:90 Watts max.
Frequency:450 KHz
Voltage:100- 240 VAC, grounded circuit
Frequency:50/60 Hz
3-Wire:183cm (18/3") SJT
Potential:< 2mV
Resistance:< 2 ohms
Per:IEC 60335-2-45 and UL499, FCC
Stability:± 1.1°C in still air
Temperature:10- 40°C
Temperature:55°C
Input:450kPa (65PSI) -

MFR-SDX Summary of contents

Page 1

... Two Port Universal Voltage Power Supply, External Air (MFR-DSX only) Two Port Universal Voltage Power Supply, with Internal Air Pump (MFR- MFR-PS2K DSI only) MFR-HDS Desolder Hand-piece MFR-DSI, MFR-SDI, MFR-DSX, MFR-SDX Ambient Operating Temperature:10- 40°C Maximum Enclosure Temperature:55°C Input Line ...

Page 2

... The MFR Solder / Desoldering Systems include both the innovative desoldering hand-piece and the solder/rework cartridge hand-piece to cover all your rework needs. Two MFR Soldering / Desoldering Systems are available. The MFR-SDX system requires shop air for desoldering. If shop air is not available, the MFR-SDI features an internal pump that provides suction. MFR SOLDERING, DESOLDERING & ...

Page 3

... Desoldering Cartridges The Desoldering Cartridges are used with the MFR-HDS De-soldering Hand-piece, primarily for solder removal on through-hole components. The tips are supplied in a range of diameters as well long reach configuration to allow improved access on tightly packed PCBs. Regular Long Reach REGULAR Part No. ...

Page 4

... T = Temperature Sensitive C = Ceramic or Heavy Load Dimensions and artwork listed are for indication/guidance only. Numbers have been rounded up. Please contact your local technical support if you require specific technical information. 2.65 mm (.104") © 2007 OK International. All rights reserved. ...