142-0593-001 Emerson Network Power, 142-0593-001 Datasheet - Page 3

• Manufacturer Part Number: 142-0593-001
• Description: CONN JACK SMA .086S-RIG SLD GOLD
• Manufacturer: Emerson Network Power
• Series: SMAr
• Type: Cable Jackr

Specifications of 142-0593-001

• Connector Style: SMA
• Connector Type: Jack, Female Sockets
• Contact Termination: Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Cable Group: RG-405 (.086 Semi Rigid)
• Frequency - Max: 18GHz
• Frequency-max: 18GHz
• Body Style: Straight
• Cable Type: 0.086 Semi Rigid
• Features: Captivated contact
• Housing Material: Brass
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: SMA
• Product: Various Connectors
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Solder Lug
• Angle: Straight
• Finish, Housing: Gold
• Material, Contact: Beryllium Copper
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: SMA
• Termination: Solder
• Voltage, Rating: 335 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 142-0593-001; J727; Q1976360

INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
SMA SOLDER TYPE STRAIGHT JACKS,
STRAIGHT PLUGS, AND STRAIGHT
BULKHEAD JACKS FOR SEMI-RIGID CABLE
Johnson Components
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
CABLE GROUP
(.086 semi-rigid)
(.141 semi-rigid)
RG 405/u
RG 402/u
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Place center contact on center conductor
4. Insert contact and cable into body assembly
center conductor.
making sure contact bottoms against cable
insulation. Solder center conductor to center
contact through solder hole. Solder must
not be allowed to run on outside of contact.
Use a minimum amount of solder for a good
joint. .020 (0.51) diameter solder is
recommended. Trim excess insulation.
making sure cable is bottomed against
insulator in body. Solder body to cable. Use
a minimum amount of heat to minimize cable
insulation movement.
Instructions
142-0593-001/006
142-0593-401/406
142-0693-001/006
142-0594-001/006
142-0594-401/406
142-0694-001/006
PART NUMBER
Assembly
.070 (1.78)
.085 (2.16)
“A”
3