133-3403-001 Emerson Network Power, 133-3403-001 Datasheet - Page 3

• Manufacturer Part Number: 133-3403-001
• Description: CONN MCX PLUG STRAIGHT RG316 GOL
• Manufacturer: Emerson Network Power
• Series: MCXr
• Type: Cable Plugr

Specifications of 133-3403-001

• Connector Style: MCX
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Snap-On
• Cable Group: RG-161, 174, 188, 316
• Frequency - Max: 6GHz
• Frequency-max: 6GHz
• Body Style: Straight
• Cable Type: RG 188/U, 316, 161, 174
• Features: Captivated Contact
• Frequency Range: 0 GHz to 6 GHz
• Housing Material: Brass
• Mounting Angle: Straight
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: MCX
• Product: Various Connectors
• Gender: Male
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Crimp
• Maximum Frequency: 6 GHz
• Angle: Straight
• Finish, Housing: Gold
• Frequency: 0 to 6 GHz
• Material, Contact: Brass
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: MCX
• Special Features: Captivated Contact
• Termination: Crimp
• Voltage, Rating: 335 V
• Plating: Gold Over Brass Except Where Noted
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1333403001; J533

INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Johnson Components
MCX SOLDER TYPE RIGHT ANGLE PLUG
FOR SEMI-RIGID CABLE
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Insert cable into body making sure cable in-
4. Solder body to cable. Use a minimum
center conductor.
sulation bottoms on center contact. Solder
center conductor to contact through the rear
access port. Use a minimum amount of sol-
der for a good joint. .020 (0.51) diameter
solder is recommended.
amount of heat to minimize cable insulation
movement. Assemble insulator then place
expansion cap in access port and seat with
a .156 (3.96) diameter punch or hand tool
141-0000-908.
CABLE GROUP
(.086 semi-rigid)
Instructions
RG 405/u
Assembly
PART NUMBER
133-3693-101
133-3693-106
3