CPMC8821 Emerson Network Power, CPMC8821 Datasheet - Page 2

• Manufacturer Part Number: CPMC8821
• Description: CONN BNC PLUG SOLDER OR CRIMP
• Manufacturer: Emerson Network Power
• Series: BNCr
• Type: Cable Plugr

Specifications of CPMC8821

• Connector Style: BNC
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Cable Group: RG-58, 59 Plenum
• Frequency - Max: 4GHz
• Frequency-max: 4GHz
• Angle: Straight
• Application: Commercial
• Cable Type: RG 58,RG 59
• Contact Plating: Gold
• Finish, Housing: Nickel
• Material, Contact: Brass, Beryllium Copper or Phosphor Bronze
• Material, Dielectric: Delrin or TPX Polymethylpentene
• Material, Housing: Brass/Zinc
• Mating Type: Bayonet
• Primary Type: BNC
• Special Features: 3-Pc
• Termination: Crimp
• Voltage, Rating: 500 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Color: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 012446238077; 367-0054; 367-0054; 367-1054; CPMC-88-21

BNC 50 Ohm Straight Crimp Plug -
Two Ferrules - 3 Piece
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: [phone] • www.cambridgeproducts.com
PART NUMBER
CPMC-88-21
CABLE TYPE
RG-58, RG-59 PLENUM
1.238 (31.45), 1.143 (29.03)
1.
2.
3.
4.
5.
“A”
Identify the connector parts. (3 piece parts)
Trim the cable to the dimensions shown. Take care not to nick the center
conductor or the braid.
Slide the crimp sleeve onto the cable, narrow end first. Solder the contact
to the center conductor using the minimum amount necessary for a good
joint, make sure that the contact is flush with the insulation of the cable.
Flare the braid.
Slide the body over the contact and under the braid. Then seat the body
firmly onto the contact.
Arrange the braid uniformly around the crimp stem of the body. Slide the
crimp sleeve forward and crimp using the recommended crimp hex.
Part Number Cable
CPMC-88-21 RG-58, RG-59 PLENUM
CONTACT I.D.
.034 (0.86)
BODY I.D.
.172 (4.37)
.240 (6.10), .250 (6.35)
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Crimp Hex
Sleeve
.213 (5.41)
FERRULE I.D.
.261 (6.63)
Strain Relief
.210 (5.33)
Crimp Hex