STM8L152C4T6TR STMicroelectronics, STM8L152C4T6TR Datasheet - Page 22

• Manufacturer Part Number: STM8L152C4T6TR
• Description: IC MCU 8BIT 16KB FLASH 48LQFP
• Manufacturer: STMicroelectronics
• Series: STM8L EnergyLiter

Specifications of STM8L152C4T6TR

• Featured Product: STM32 Cortex-M3 Companion Products
• Core Processor: STM8
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, IR, LCD, POR, PWM, WDT
• Number Of I /o: 41
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 25x12b, D/A 1x12
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Core: STM8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Functional overview
3.14
3.14.1
3.14.2
3.15
3.16
3.16.1
Note:
3.16.2
Note:
22/122
Watchdog timers
The watchdog system is based on two independent timers providing maximum security to
the applications.
Window watchdog timer
The window watchdog (WWDG) is used to detect the occurrence of a software fault, usually
generated by external interferences or by unexpected logical conditions, which cause the
application program to abandon its normal sequence.
Independent watchdog timer
The independent watchdog peripheral (IWDG) can be used to resolve processor
malfunctions due to hardware or software failures.
It is clocked by the internal LSI RC clock source, and thus stays active even in case of a
CPU clock failure.
Beeper
The beeper function outputs a signal on the BEEP pin for sound generation. The signal is in
the range of 1, 2 or 4 kHz.
Communication interfaces
SPI
The serial peripheral interface (SPI1) provides half/ full duplex synchronous serial
communication with external devices.
●
●
●
●
●
●
SPI1 can be served by the DMA1 Controller.
I²C
The I
specific sequencing, protocol, arbitration and timing.
●
●
●
●
●
I
2
C1 can be served by the DMA1 Controller.
Maximum speed: 8 Mbit/s (f
Full duplex synchronous transfers
Simplex synchronous transfers on 2 lines with a possible bidirectional data line
Master or slave operation - selectable by hardware or software
Hardware CRC calculation
Slave/master selection input pin
Master, slave and multi-master capability
Standard mode up to 100 kHz and fast speed modes up to 400 kHz.
7-bit and 10-bit addressing modes.
SMBus 2.0 and PMBus support
Hardware CRC calculation
2
C bus interface (I
2
C1) provides multi-master capability, and controls all I²C bus-
Doc ID 15962 Rev 6
SYSCLK
/2) both for master and slave
STM8L151xx, STM8L152xx