MCP65R46T-2402E/CHY Microchip Technology, MCP65R46T-2402E/CHY Datasheet - Page 19

• Manufacturer Part Number: MCP65R46T-2402E/CHY
• Description: IC COMPARATOR 2.4V REF SOT-23-6
• Manufacturer: Microchip Technology
• Type: General Purposer

Specifications of MCP65R46T-2402E/CHY

• Output Type: CMOS, Open-Drain, TTL
• Package / Case: *
• Number Of Elements: 1
• Voltage - Supply: 1.8 V ~ 5.5 V
• Mounting Type: Surface Mount
• Product: Digital Comparators
• Offset Voltage (max): 10 mV
• Input Bias Current (max): 1 pA
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• High Level Output Current: - 100 nA
• Minimum Operating Temperature: - 40 C
• Comparator Type: Low Power
• No. Of Comparators: 1
• Ic Output Type: Open Drain
• Output Compatibility: CMOS, TTL
• Supply Current: 2.5µA
• Supply Voltage Range: 1.8V To 5.5V
• Amplifier Case Style: SOT-23
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: MCP65R46T-2402E/CHY; MCP65R46T-2402E/CHYTR

3.0
Descriptions of the pins are listed in
TABLE 3-1:
3.1
The comparator non-inverting and inverting inputs are
high-impedance CMOS inputs with low bias currents.
3.2
The comparator outputs are CMOS/TTL compatible
push-pull and open-drain digital outputs. The push-pull
is designed to directly interface to a CMOS/TTL com-
patible pin while the open-drain output is designed for
level shifting and wired-OR interfaces.
3.3
The V
1.21V or 2.4V.
 2010 Microchip Technology Inc.
MCP65R41/6
REF
SOT23-6
PIN DESCRIPTIONS
Analog Inputs
Digital Outputs
Analog Outputs
1
2
3
4
5
6
Output pin outputs a reference voltage of
PIN FUNCTION TABLE
Symbol
V
OUT
Table
V
V
V
V
REF
IN
IN
DD
SS
+
–
3-1.
Digital Output
Ground
Non-inverting Input
Inverting Input
Reference Voltage Output
Positive Power Supply
3.4
The positive power supply pin (V
higher than the negative power supply pin (V
normal operation, the other pins are at voltages
between V
Typically, these parts are used in a single (positive)
supply configuration. In this case, V
ground and V
need a local bypass capacitor (typically 0.01 µF to
0.1 µF) within 2 mm of the V
bulk capacitor with the nearby analog parts (within
100 mm), but it is not required.
Power Supply (V
SS
and V
DD
Description
is connected to the supply. V
DD
MCP65R41/6
.
DD
SS
pin. These can share a
DD
and V
SS
DS22269A-page 19
) is 1.8V to 5.5V
is connected to
DD
)
SS
DD
). For
will