ITR-8307/TR8 Everlight Electronics CO., LTD, ITR-8307/TR8 Datasheet - Page 8

• Manufacturer Part Number: ITR-8307/TR8
• Description: Photointerruptors Opto Interrupter
• Manufacturer: Everlight Electronics CO., LTD

Specifications of ITR-8307/TR8

• Forward Voltage: 1.2 V
• Maximum Fall Time: 400 us
• Maximum Operating Temperature: + 85 C
• Maximum Rise Time: 400 us
• Minimum Operating Temperature: - 25 C
• Mounting Style: SMD/SMT
• Wavelength: 940 nm
• Sensing Method: Reflective
• Output Collector Emitter Voltage (detector): 15 V
• Maximum Reverse Voltage (emitter): 6 V
• Maximum Collector Current (detector): 20 mA
• Output Device: Photodarlington
• Power Dissipation: 100 mW
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Revision
LifecyclePhase:
Recommended Method of Storage






unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
The following are general recommendations for moisture sensitive level (MSL) 4 storage and use:
Device No：DRX-0000011
Everlight Electronics Co., Ltd.
Shelf life in sealed bag: 12 months at < 40 °C and < 90% relative humidity (RH)
After bag is opened, devices that will be subjected to reflow solder or other high temperature
process must
a) Mounted within 72 hours of factory conditions < 30 °C/60%RH, or
b) Stored at <20% RH
Devices require bake, before mounting, if:
Humidity Indicator Card is > 20% when read at 23 ± 5 °C
If baking is required, devices may be baked:
a) 192 hours at 40 ,and <5% RH(dry air/nitrogen) or
b) 96 hours at 60 ,
c) 24 hours at 125 °C
Soldering Condition
a) Pb-free solder temperature profile
b) Reflow soldering should not be done more than two times.
c) When soldering, do not put stress on the LEDs during heating.
d) After soldering, do not warp the circuit board.
Repairing
: 2
Repair should not be done after the LEDs have been soldered. When repairing is
℃ and <5% RH for all device containers
℃
http://www.everlight.com
Prepared date:2009/03/23
Release Date:2009-03-23 21:53:56.0
Expired Period: Forever
Rev 2
Prepared by: Vic Liao
ITR8307/L24/TR8
Page: 8 of 10