1-2154009-6 TE Connectivity, 1-2154009-6 Datasheet - Page 4

• Manufacturer Part Number: 1-2154009-6
• Description: CONN FEED-THRU RIGHT BLUE
• Manufacturer: TE Connectivity
• Type: Wire to Boardr

Specifications of 1-2154009-6

• Connector Type: Wire To Board
• Contact Termination: IDC / IDT
• Gender: Plug
• No. Of Contacts: 4
• No. Of Rows: 1
• Pitch Spacing: 2.5mm
• Contact Plating: Tin
• Product: IDC Connector
• Mounting Style: Wire
• Termination Style: IDC
• Current Rating: 2100 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: A101457

Rev B
3.7. Product Selection
All NEVALO Interconnects should be used with corresponding colored ribbon cable, light modules, and drivers.
Right/left, up/down orientation corresponds to connector orientation relative to NEVALO ribbon cable stripe.
Figure 3 shows proper connector orientation. If a third party is used, a bus-to-wire connector is required.
.
3.8. PC Board
A. Material and Thickness
The SMT clip pc board material shall be metal clad. The driver header pc board material shall be FR4.
There is no required thickness for the pc boards.
B. Tolerance
Maximum allowable bow of the pc board shall be 0.05 mm over the length of the connector.
C. Pads
The pc board circuit pads must be solderable in accordance with Test Specification 109-11.
D. Layout
The pc board layout must be designed using the dimensions provided on the customer drawing for the
specific connector. Reference sample of the recommended pc board layout is shown Figure 4.
Bus-to-Wire (BTW)
NEVALO Driver
Straight Left (STL)
Third Party Driver
Driver Header
Figure 3
Feed-Thru Right (FTR)
Right-Angle Down (RAD)
Feed-Thru Left (FTL)
Straight Right (STR)
114-13290
4 of 12