141-0407-012 Emerson Network Power, 141-0407-012 Datasheet - Page 17

• Manufacturer Part Number: 141-0407-012
• Description: CONN PLUG SMA STR CRIMP RG-58/U
• Manufacturer: Emerson Network Power
• Series: SMAr

Specifications of 141-0407-012

• Connector Style: SMA
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Cable Group: RG-58, 141, 303, LMR-195, Belden 7806A
• Frequency - Max: 12.4GHz
• Frequency-max: 12.4GHz
• Body Style: Straight
• Cable Type: RG 58/U, RG 141, RG 303, LMR 195, HPF 195, RF 195
• Features: Stainless Steel connector
• Frequency Range: 0 GHz to 26.5 GHz
• Housing Material: Stainless Steel
• Mounting Angle: Straight
• Rf Series: SMA
• Product: Various Connectors
• Gender: Male
• Contact Plating: Gold
• Shell Plating: Passivated Stainless Steel
• Termination Style: Crimp
• Maximum Frequency: 26.5 GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: J877

SMA Straight Solder Type for Semi-Rigid Cable
1. Identify the connector (plug or jack) and tools
2. Strip the cable jacket and dielectric to dimension shown.
3. Bevel the entire diameter on the end of the cable center
4. Insert the stripped cable into the bushing of the
5. Attach the appropriate soldering mating fixture to the
6. Clean all debris from the prepared cable and insert the
7. Insert the stop screw into the mating fixture. Clamp the
Inches (Millimeter)
Cable Type
RG-405/U (.086 Semi-Rigid)
RG-402/U (.141 Semi-Rigid)
Do not nick the center conductor.
conductor until the point resembles the appropriate
dimensional profile. This operation can be accomplished
effectively by using the recommended center conductor
pointing tool as described in step 4.
appropriate pointing tool until the center conductor just
touches the blade. While maintaining light pressure on
the center conductor against the blade, turn the tool in a
counter-clockwise fashion as viewed from the bushing end
of the tool. Continue cutting the center conductor point
until the cable jacket bottoms out inside the bushing.
connector and tighten to a maximum of 8 inch pounds of
torque.
cable into the connector, making sure that the cable jacket
bottoms out against the internal shoulder of the
connector body.
cable and fixtured connector assembly securely in the
soldering vise. Solder the connector body to the cable as
shown, while insuring the cable dielectric expansion does
not move the assembly. Allow the assembly to cool before
removing the connector from the fixture
Connectivity....for
Business-Critical Continuity
Part No.
141-0593-421
141-0693-062
141-0594-421
141-0694-062
Stainless Steel SMA Connectors
17