138-4418-107 Emerson Network Power, 138-4418-107 Datasheet - Page 17

• Manufacturer Part Number: 138-4418-107
• Description: CONN PLUG N R/A CRIMP RG-214
• Manufacturer: Emerson Network Power
• Series: N Typer

Specifications of 138-4418-107

• Connector Style: N Type
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Threaded
• Cable Group: RG-9, 214
• Frequency - Max: 11GHz
• Frequency-max: 11GHz
• Body Style: Right Angle
• Cable Type: RG9, RG214
• Frequency Range: 0 GHz to 11 GHz
• Rf Series: N
• Product: Various Connectors
• Gender: Male
• Shell Plating: Brass
• Maximum Frequency: 11 GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: J850

Type N Straight Plug Solder Style for Semi-Rigid Cable
1. Identify connector parts (2 piece parts) and tools (5 piece parts).
2. Strip cable jacket and dielectric to dimension shown. Do not nick
3. Place plug contact onto center conductor, insert appropriate sized
4. Insert contact into location fixture and clamp cable in vise. Tighten
5. Solder contact to center conductor through solder hole using .020
6. After solder joint has cooled, loosen stop screw and remove solder
7. Insert contact and cable into plug connector assembly, making
8. Solder connector body to cable jacket, using a minimum amount of
Cable Group
RG-405, .086 Semi-Rigid
RG-402, .141 Semi-Rigid
RG-401, .250 Semi-Rigid
Tool
Solder Shim
Location Fixture
Cable Vise
Clamp Inserts
Stop Screw
center conductor. Clean all debris from cable.
solder shim between cable jacket and contact.
stop screw until light pressure is applied between contact, solder
shim and cable jacket.
(.051) diameter flux core solder wire. Use a minimum amount of
solder for a good joint.
shim. Remove cable from vise and remove any excess solder from
contact with a sharp blade and clean all debris from contact and
cable.
sure cable jacket bottoms out against internal shoulder of
connector assembly. Insert location fixture into connector
assembly and clamp cable in vise. Tighten stop screw until light
pressure is applied between connector assembly and cable jacket.
solder for a full fillet joint. Allow assembly to cool before removing
connector from vise.
Connectivity....for
Business-Critical Continuity
Part No.
138-4693-001
138-4694-001
138-4696-001
Assembly
138-4693-001
140-0000-984
140-0000-983
140-0000-962
140-0000-964
140-0000-981
“A”
.085 (2.16)
.085 (2.16)
.100 (2.54)
138-4694-001
140-0000-984
140-0000-983
140-0000-962
140-0000-965
140-0000-981
138-4696-001
140-0000-985
140-0000-983
140-0000-962
140-0000-986
140-0000-981
Type N Connectors
17