EVAL_PAN1321 Panasonic - ECG, EVAL_PAN1321 Datasheet - Page 7

• Manufacturer Part Number: EVAL_PAN1321
• Description: EVAL KIT FOR PAN1321 INFINEON
• Manufacturer: Panasonic - ECG
• Series: PAN1321r
• Type: Transceiver, Bluetooth 2.0+EDRr

Specifications of EVAL_PAN1321

• Frequency: 2.4GHz
• For Use With/related Products: PAN1321
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: P14518

CLASSIFICATION
Einstufung
SUBJECT
Thema
PANASONIC ELECTRONIC DEVICES EUROPE
4.4 POWER SUPPLY SECTION
4.4.1 DIRECT SUPPLY MODE
The power supply section provides a regulated +3V DC voltage for the PAN1311/21 modules
and the Evaluation Board circuitry. For convenience a wider choice of input options exists.
These options have to be used alternatively. While protection mechanisms against parallel
connection of different power supplies exist, it is recommended to check thoroughly that only
one supply voltage is present. The following supply options exist:
For measurement purposes it may be helpful to directly supply the module only. This is mainly
required for tests without a regulator. To enable direct supply mode please set the “JP1” jumper
in the “2-3” position. The module is now directly connected to the 2mm Lab-connector. To
power the rest of the on-board circuitry, especially the RS232 interface driver, please note that it
is required to use one of the two options of power supply, described in the section before.
ATTENTION :
•
•
European Technology Center
2mm Lab-connectors: This allow a voltage range of 3.4 – 15 V DC
USB-connector: Only used for power supply! 5 V DC will be taken from the USB port
GmbH
Please make sure that the voltage does not exceed 3.6 volts in this
mode. Operation above this level will result in permanent damage to
the module.
Evaluation Board (EVB) for
PAN1311/21
No.
DS_PAN1311/21EVB
PAGE
Seite
DATE
Datum
14.10.2008
7 of 16
DESIGNED
Erstellt
SA
REV.
D