1490700-1 Tyco Electronics, 1490700-1 Datasheet - Page 2

• Manufacturer Part Number: 1490700-1
• Description: DIE ASSEMBLY,TERMINYL 1/0
• Manufacturer: Tyco Electronics

Specifications of 1490700-1

• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With: 55822-1 - CONN RING TONG 1/0AWG #1/4324058 - CONN RING TONG 1/0AWG #1/255821-1 - CONN RING 1/0AWG #1/4A27396 - CONN RING 1/0 AWG #3/8 TREMINYLA27395 - CONN RING 1/0 AWG #1/4 TERMINYL
• Lead Free Status / RoHS Status: Not applicable / Not applicable

4. CRIMPING PROCEDURE
4.1. Crimping Terminals
2
Crimping Die Assemblies
DANGER
2. Activate the power unit until the lower die
release button in the ram is exposed.
3. Depress the release button and slide the
indenter out of the ream.
(AWG)
(AWG)
WIRE
WIRE
SIZE
Avoid personal injury. When operating tool or
power unit, exercise caution while holding
terminals or wire near the crimping area.
Typical Terminal
Figure 2
TERMINAL
TERMINYL TERMINAL AND SPLICE
Figure 3
WIRE STRIP LENGTH
CAUTION
1. Strip wire to the dimensions listed in Figure 3.
Do not nick or cut the wire strands.
2. Select the proper color–coded terminal for the
wire size. The wire size stamped on the terminal
tongue and on the crimping die must match the
wire size selected.
3. Insert stripped wire fully into terminal wire barrel.
The end of the conductor must not protrude more
than 1.60 mm [.063 in.] beyond the edge of the
wire barrel.
4. Place the terminal in the stationary die with the
edge of the wire barrel resting against the locator
and the bottom of the terminal tongue facing the
stationary die. See Figure 4.
5. Holding wire in place, activate tool or power unit
to complete crimp.
NOTE
6. Inspect the crimp according to Section 5.
!
i
Do NOT turn or twist the wire or terminal during
insertion.
If terminal sticks in die after crimping, apply a
rocking action to the terminal to remove it from
the die. Wipe light oil on the dies to prevent
sticking, or use spray dry lubricant.
Typical Splice
É É É
É É É É É É
SPLICE
Ç Ç Ç Ç
Ç Ç Ç Ç É É É
408-8704
A