97-3106A-20-33S Amphenol Industrial Operations, 97-3106A-20-33S Datasheet - Page 32
![CIRCULAR CONN PLUG SIZE 20, 11POS, CABLE](/photos/18/72/187202/4117326_sml.jpg)
97-3106A-20-33S
Manufacturer Part Number
97-3106A-20-33S
Description
CIRCULAR CONN PLUG SIZE 20, 11POS, CABLE
Manufacturer
Amphenol Industrial Operations
Type
Cable Plugr
Specifications of 97-3106A-20-33S
Connector Body Material
Aluminum Alloy
Gender
Receptacle
Contact Gender
Socket
Connector Mounting
Cable
Connector Shell Size
20
Connector Type
Circular Industrial
Agency Approvals
UL/CSA
Angle
Straight
Application
Commercial
Brand/series
97 Series
Class
A
Contact Configuration
11#16
Contact Plating
Silver
Contact Type
Socket
Current, Rating
13 A
Finish, Housing
Olive Drab Cadmium
Housing Type
Metal
Insert Arrangement
20-33
Material, Dielectric
Diallyl-Phthalate
Material, Housing
Aluminum Alloy
Mating Type
Threaded
Mounting Type
Free Hanging
Number Of Contacts
11
Primary Type
5015 Commercial
Shell Size
20
Strain Relief
Solid
Termination
Solder
Voltage, Rating
500/700 VAC/VDC
Wire, Awg
16
97 series
special purpose connectors
Potting (438 Construction)
Potting constructions actually exceed the Type “E” requirements of
military specifications for moisture-proof connectors. These con-
structions replace the back shell completely with a lightweight
threaded retainer ring permanently staked to the shell.
To seal the back of the connector, potting compound is injected into
an expendable polyethylene potting form and allowed to cure or
set. When the form is removed, the resilient hemispherical shaped
insulation extends well into the connector. It forms a chemical bond
to the inner and outer walls of the plug, to the back of the insert,
around the soldered connections and well out along the leads.
Not only is the back shell eliminated, but also the cable clamp. The
solder joints are completely and individually protected by the resil-
ient mass which surrounds them and resists transmittal of vibration
to the soldered connections. The completed assembly is not only
moisture-proof, but also pressurized and resistant to salt water, air-
craft lubricating oil and jet fuels.
Expendable Potting Forms
For companies not using their own potting molds, expendable poly-
ethylene forms can be provided. These expendable forms need no
treatment before use. Though designed to be discarded, they can
be left on assemblies after potting. Nylon potting forms to be left
permanently on the assembly are also available. These forms are
supplied with construction (824) and (871).
How to Order
To order connectors in constructions for potting, use the standard
MS nomenclature (MS3100A, MS3101A, and MS3106A construc-
tions are available), but substitute “97” for “MS”, drop the “A” suffix
for type of back shell, and add the application deviation (XXX) as
shown on the chart. Example: 97-3106-28-16S (438).
Deviation
438
541
824
826
871
Modified “MS”, for potting where back shell is replaced
by threaded retainer ring. A type “W” washer is included
under 3106 coupling ring. (Boot is not included).
Consists of (438) construction with 9755-255-XX
expendable poly potting form, and type “W” washer.
Connectors are marked “97-310X-XX-XX(541).”
Consists of (438) construction plus nylon potting form
and type “W” washer; bagged, marked MS25183.
Consists of (517) construction plus nylon potting form
and type “W” washer; marked MS25183A.
Consists of (438) construction with 9755-271-XX nylon
potting form, and type “W” washer; bagged. Connectors
are marked “97-310X-XX-XX(871).”
Explanation
30
3100
3101
3100
3101
3100
3101
Shell Styles
3106
3106
3106
3107
3106
3107
3106
3107