166500-2 Tyco Electronics, 166500-2 Datasheet - Page 4

• Manufacturer Part Number: 166500-2
• Description: CONTACT, SOCKET, 24-20AWG, CRIMP
• Manufacturer: Tyco Electronics
• Series: AMPMODUr
• Type: Signalr

Specifications of 166500-2

• Connector Type: Wire To Board Contact
• Contact Plating: Gold
• Contact Material: Phosphor Bronze
• Wire Size (awg): 24-20
• Contact Termination: Crimp
• Pin Or Socket: Socket
• Wire Gauge: 20-24 AWG
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Product Type: Contacts
• Contact Gender: Socket (Female)
• Mounting Style: Wire
• Termination Style: Crimp
• Wire Gauge Range: 24-20
• Current Rating: 3 A
• For Use With: AMPMODU Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

3.3. Crimped Contact Requirements
The contact shall be located in desired tooling and crimped according to the instructions packaged with that
tooling. See Section 5, TOOLING, of this document for details on tooling options and instructional materials.
4 of 18
CAUTION
0.13 [.005]
Max Wire
Barrel Flash
0.13 [.005] Min. Rear Bellmouth
A. Wire Barrel Crimp
The crimp applied to the wire portion of the contact is the most compressed area and is most critical in
ensuring optimum electrical and mechanical performance of the crimped contact. The contact wire barrel
crimp height must be within the dimension provided in Figure 2.
!
Wire Conductors and
Insulation Must Both
be Visible in This Area
See Section YY
Wire Barrel Seam Closed with
No Conductor Strands Showing
Wire insulation shall NOT be cut or broken during the crimping operation, nor shall the insulation be crimped into the
contact wire barrel. Reasonable care should be taken by tooling operators to provide undamaged wire terminations.
Section X- - X
Wire Barrel
Crimp Width
Wire Barrel
Crimp Height
X
X
F- - Crimp
O- - Crimp
Figure 3
Effective Crimp Length
2.16 [.085] Min.
Crimped
Contact
0.13 [.005] Max.
Front Cutoff Tab;
0.25 [.010] Max.
Rear Cutoff Tab
0.13 [.015] Max. Conductor Location
Locking Lance
Not Deformed
Section YY
See Section YY
114- 25021
0.08 [.003]
Max. Burr
Rev D