PIC16F1827-I/ML Microchip Technology, PIC16F1827-I/ML Datasheet - Page 16

• Manufacturer Part Number: PIC16F1827-I/ML
• Description: IC, 8BIT MCU, PIC16F, 32MHZ, QFN-28
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1827-I/ML

• Controller Family/series: PIC16F
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 384Byte
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: EUSART, I2C, SPI
• Core Size: 8 Bit
• Program Memory Size: 4kWords
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC16F/LF182X/PIC12F/LF1822
4.3.5
The Read Data from Data Memory command will
transmit data bits out of the data memory starting with
the second rising edge of the clock input. The ICSPDAT
pin will go into Output mode on the second rising edge,
and it will revert to Input mode (high-impedance) after
the 16th rising edge. The data memory is 8 bits wide,
and therefore, only the first 8 bits that are output are
actual data. If the data memory is code-protected, the
data is read as all zeros. A timing diagram of this
command is shown in Figure 4-5.
FIGURE 4-5:
4.3.6
The address is incremented when this command is
received. It is not possible to decrement the address.
To reset this counter, the user must use the Reset
Address command or exit Program/Verify mode and re-
enter it.
If the address is incremented from address 7FFFh, it
will wrap-around to location 0000h. If the address is
incremented from FFFFh, it will wrap-around to location
8000h.
FIGURE 4-6:
DS41390C-page 16
ICSPCLK
ICSPDAT
(from device)
ICSPDAT
(from Programmer)
ICSPCLK
ICSPDAT
READ DATA FROM DATA MEMORY
INCREMENT ADDRESS
READ DATA FROM DATA MEMORY COMMAND
INCREMENT ADDRESS
1
1
1
0
2
0
2
1
3
1
3
Advance Information
4
1
0
Input
5
4
0
Address
0
6
0
5
X
T
X
DLY
6
1
T
DLY
x
2
LSb
Next Command
Output
1
 2010 Microchip Technology Inc.
Address + 1
X
2
15
X
MSb
3
16
X
Input