LM2596SX-5.0 National Semiconductor, LM2596SX-5.0 Datasheet - Page 27

• Manufacturer Part Number: LM2596SX-5.0
• Description: IC, STEP-DOWN VOLT REGULATOR 5V TO-220-5
• Manufacturer: National Semiconductor

Specifications of LM2596SX-5.0

• Primary Input Voltage: 40V
• Output Voltage Fixed: 5V
• No. Of Outputs: 1
• No. Of Pins: 5
• Output Current: 3A
• Operating Temperature Range: -40°C To +125°C
• Termination Type: SMD
• Filter Terminals: SMD
• Rohs Compliant: No
• Frequency: 150kHz
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Application Information
INVERTING REGULATOR SHUTDOWN METHODS
To use the ON /OFF pin in a standard buck configuration is
simple, pull it below 1.3V (
turn regulator ON, pull it above 1.3V to shut the regulator
FIGURE 28. Inverting Regulator Ground Referenced Shutdown using Opto Device
@
25˚C, referenced to ground) to
FIGURE 27. Inverting Regulator Ground Referenced Shutdown
(Continued)
27
OFF. With the inverting configuration, some level shifting is
required, because the ground pin of the regulator is no
longer at ground, but is now setting at the negative output
voltage level. Two different shutdown methods for inverting
regulators are shown in Figure 27 and 28.
01258342
01258343
www.national.com