LM337LM National Semiconductor, LM337LM Datasheet - Page 6

• Manufacturer Part Number: LM337LM
• Description: IC, ADJ LINEAR REG, 1.2V TO 37V, 8-SOIC
• Manufacturer: National Semiconductor

Specifications of LM337LM

• Primary Input Voltage: 40V
• Output Voltage Adjustable Range: 1.2V To 37V
• No. Of Outputs: 1
• No. Of Pins: 8
• Output Current: 100mA
• Operating Temperature Range: -25°C To +125°C
• Termination Type: SMD
• Filter Terminals: SMD
• Rohs Compliant: No
• Current Rating: 1A
• Dc: 0036
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
BANNED SUBSTANCE COMPLIANCE
National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain
no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Leadfree products are RoHS compliant.
Physical Dimensions
NOTES: UNLESS OTHERWISE SPECIFIED
1. EPOXY COATING.
2. 63Sn/37Pb EUTECTIC BUMP.
3. RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.
4. PIN A1 IS ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEXT ORIENTATION. REMAINING PINS ARE NUMBERED
COUNTERCLOCKWISE.
5. XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X1 IS PACKAGE WIDTH. X2 IS PACKAGE LENGTH AND X3 IS
PACKAGE HEIGHT (SEE TABLE, SHEET 2). EXAMPLE: BLA06AFA HAS WIDTH = 1006. LENGTH = 1641, HEIGHT = 795.
6. REFERENCE JEDEC REGISTRATION MO-211, VARIATION BC.
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
National Semiconductor
Americas Customer
Support Center
Email: [e-mail]
Tel: [phone]
National Semiconductor
Europe Customer Support Center
Deutsch Tel: [phone]
English
Français Tel: [phone]
inches (millimeters) unless otherwise noted (Continued)
X1 = 1133µm X2 = 1819µm X3 = 945µm
Email: [e-mail]
Fax: [phone]
Tel: [phone]
NS Package Number BLA06FNB
6-Bump micro SMD
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Support Center
Email: [e-mail]
National Semiconductor
Japan Customer Support Center
Fax: [phone]
Email: [e-mail]