ADG602BRMZ Analog Devices Inc, ADG602BRMZ Datasheet - Page 9

• Manufacturer Part Number: ADG602BRMZ
• Description: IC, ANALOG SWITCH, SINGLE, SPST, MSOP-8
• Manufacturer: Analog Devices Inc
• Type: Analog Switchr

Specifications of ADG602BRMZ

• Analog Switch Type: SPST
• No. Of Channels: 1
• Bandwidth: 180MHz
• On State Resistance Max: 2.5ohm
• Turn Off Time: 45ns
• Turn On Time: 80ns
• Supply Voltage Range: ± 2.7V To ± 5.5V
• Function: Switch
• Circuit: 1 x SPST- NC
• On-state Resistance: 2.5 Ohm
• Voltage Supply Source: Dual Supply
• Voltage - Supply, Single/dual (±): ±2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
• Rohs Compliant: Yes
• Package: 8MSOP
• Maximum On Resistance: 5@5V Ohm
• Maximum High Level Output Current: 100 mA
• Maximum Turn-off Time: 80@5V ns
• Maximum Turn-on Time: 220@5V ns
• Switch Architecture: SPST
• Power Supply Type: Single|Dual
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TERMINOLOGY
V
Most positive power supply potential.
V
Most negative power supply potential.
I
Positive supply current.
I
Negative supply current.
GND
Ground (0 V) reference.
S
Source terminal. Can be an input or an output.
D
Drain terminal. Can be an input or an output.
IN
Logic control input.
V
Analog voltage on Terminal D and Terminal S.
R
Ohmic resistance between Terminal D and Terminal S.
R
Flatness is defined as the difference between the maximum and
minimum values of on resistance as measured over the specified
analog signal range.
I
Source leakage current with the switch off.
I
Drain leakage current with the switch off.
I
Channel leakage current with the switch on.
DD
SS
S
D
D
ON
FLAT (ON)
DD
SS
D
, I
(Off)
(Off)
, V
S
(On)
S
Rev. C | Page 9 of 12
V
Maximum input voltage for Logic 0.
V
Minimum input voltage for Logic 1.
I
Input current of the digital input.
C
Off switch source capacitance. Measured with reference to ground.
C
Off switch drain capacitance. Measured with reference to ground.
C
On switch capacitance. Measured with reference to ground.
C
Digital input capacitance.
t
Delay between applying the digital control input and the output
switching on.
t
Delay between applying the digital control input and the output
switching off.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
On Response
Frequency response of the on switch.
Insertion Loss
Loss due to the on resistance of the switch.
INL
ON
OFF
S
D
D
IN
INL
INH
, C
(Off)
(Off)
(I
INH
S
(On)
)
ADG601/ADG602