DSPIC30F1010T-30I/MM Microchip Technology, DSPIC30F1010T-30I/MM Datasheet - Page 7

• Manufacturer Part Number: DSPIC30F1010T-30I/MM
• Description: 6KB, Flash, 256bytes-RAM, 30MIPS, 21I/O, 16-bit Family,nanoWatt 28 QFN-S 6x6mm T
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F1010T-30I/MM

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 6KB (2K x 24)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-QFN
• Data Bus Width: 16 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 30 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240002, DM300023, DM330011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300023 - KIT DEMO DSPICDEM SMPS BUCK
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: DSPIC30F1010T-30I/MMTR

11. Module: PWM Override Enable
© 2008 Microchip Technology Inc.
The OVRDAT<1:0> bits in the IOCONx register
should determine the state of the PWMx output
pins when the OVRENH and OVRENL bits
(IOCONx<9:8>) are set. However, the PWM
override feature does not work correctly. The
PWMxH and PWMxL pins do not exhibit the state
specified by the OVRDAT<1:0> bits when only one
of the override bits (OVRENH or OVRENL) is set.
If both bits are set, the override state is exhibited
correctly on the PWMxL and PWMxH pins.
Work around
If override capability is desired on only one of the
PWM pin pairs, use the GPIO module to override
the PWM outputs. This can be done using the
PENH and PENL bits in the IOCONx register.
When the PENH/PENL bits in the IOCONx
register. When the PENH/PENL bits are cleared,
the GPIO module assumes control of the
PWMxH/L output pin. The GPIO module must be
set up in advance for the desired override output
states, and the pins must be configured as digital
outputs. This includes setting the PORTx and
TRISx registers correctly, which correspond to the
PWMxH and PWMxL pins.
dsPIC30F1010/202X
DS80290J-page 7