LM4041DIM3-1.2 National Semiconductor, LM4041DIM3-1.2 Datasheet - Page 8

• Manufacturer Part Number: LM4041DIM3-1.2
• Description: Voltage Regulator IC
• Manufacturer: National Semiconductor

Specifications of LM4041DIM3-1.2

• Peak Reflow Compatible (260 C): No
• Current Rating: 65A
• Output Voltage Max: 1.2V
• Leaded Process Compatible: No
• Reference Volt Tolerance ±%: 1%
• Mounting Type: Surface Mount
• Supply Current: 60A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

www.national.com
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed
specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test
conditions.
Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by T
ambient thermal resistance), and T
number given in the Absolute Maximum Ratings, whichever is lower. For the LM4041, T
is 326˚C/W for the SOT-23 package, 415˚C/W for the SC70 package and 180˚C/W with 0.4" lead length and 170˚C/W with 0.125" lead length for the TO-92 package.
Note 3: The human body model is a 100 pF capacitor discharged through a 1.5 k
directly into each pin. All pins are rated at 2kV for Human Body Model, but the feedback pin which is rated at 1kV.
Note 4: Typicals are at T
Note 5: Limits are 100% production tested at 25˚C. Limits over temperature are guaranteed through correlation using Statistical Quality Control (SQC) methods.
The limits are used to calculate National’s AOQL.
Note 6: The boldface (over-temperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance
to T
max T=65˚C is shown below:
The total over-temperature tolerance for the different grades in the extended temperature range where max T = 100 ˚C is shown below:
Therefore, as an example, the A-grade LM4041-1.2 has an over-temperature Reverse Breakdown Voltage tolerance of
Note 7: When V
the die (-) output and the package (-) output pin. See the Output Saturation (SOT-23 only) curve in the Typical Performance Characteristics section.
Note 8: Reference voltage and temperature coefficient will change with output voltage. See Typical Performance Characteristics curves.
Typical Performance Characteristics
Temperature Drift for Different
Average Temperature Coefficient
±
[( V
Electrical Characteristics (continued)
MAX
R
v T)(max T)(V
or T
MIN
, and V
OUT
1.6V, the LM4041-ADJ in the SOT-23 package must operate at reduced I
R
R
)]. Where, V
J
is the reverse breakdown voltage. The total over-temperature tolerance for the different grades in the industrial temperature range where
= 25˚C and represent most likely parametric norm.
A
(ambient temperature). The maximum allowable power dissipation at any temperature is PD
R
/ T is the V
R
temperature coefficient, max T is the maximum difference in temperature from the reference point of 25 ˚C
DS011392-19
C-grade:
D-grade:
C-grade:
D-grade:
A-grade:
B-grade:
E-grade:
B-grade:
E-grade:
±
±
±
±
±
±
±
±
±
0.75% =
0.85% =
1.15% =
1.98% =
2.98% =
1.2% =
1.5% =
2.5% =
4.5% =
Output Impedance vs Frequency
±
±
±
±
8
±
±
±
±
±
0.2%
0.5%
1.0%
2.0%
0.1%
0.2%
0.5%
1.0%
2.0%
resistor into each pin. The machine model is a 200 pF capacitor discharged
Jmax
±
±
±
±
±
±
±
= 125˚C, and the typical thermal resistance (
±
±
100 ppm/˚C x 100˚C
100 ppm/˚C x 100˚C
150 ppm/˚C x 100˚C
150 ppm/˚C x 100˚C
100 ppm/˚C x 65˚C
100 ppm/˚C x 65˚C
100 ppm/˚C x 65˚C
150 ppm/˚C x 65˚C
150 ppm/˚C x 65˚C
R
. This is caused by the series resistance of the die attach between
Jmax
(maximum junction temperature),
±
1.2V x 0.75% =
max
DS011392-4
JA
= (T
), when board mounted,
±
9.2 mV.
Jmax
− T
JA
A
)/
(junction to
JA
or the