MCP1407-E/MF Microchip Technology, MCP1407-E/MF Datasheet - Page 9

• Manufacturer Part Number: MCP1407-E/MF
• Description: IC,Dual MOSFET Driver,LLCC,8PIN,PLASTIC
• Manufacturer: Microchip Technology
• Type: Low Sider

Specifications of MCP1407-E/MF

• Configuration: Low-Side
• Input Type: Non-Inverting
• Delay Time: 40ns
• Current - Peak: 6A
• Number Of Configurations: 1
• Number Of Outputs: 1
• Voltage - Supply: 4.5 V ~ 18 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-DFN
• Rise Time: 30 ns
• Fall Time: 30 ns
• Supply Voltage (min): 4.5 V
• Supply Current: 0.25 mA
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Number Of Drivers: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• High Side Voltage - Max (bootstrap): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3.0
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1:
3.1
V
has a voltage range of 4.5V to 18V. This input must be
decoupled to ground with local capacitors.
bypass
impedance path for the peak currents that are to be
provided to the load.
3.2
The MOSFET driver input is a high-impedance,
TTL/CMOS-compatible input. The input also has
hysteresis between the high and low input levels,
allowing them to be driven from slow rising and falling
signals, and to provide noise immunity.
3.3
Ground is the device return pin. The ground pin should
have a low impedance connection to the bias supply
source return. High peak currents will flow out the
ground pin when the capacitive load is being
discharged.
3.4
The output is a CMOS push-pull output that is capable
of sourcing peak currents of 6A (V
output impedance ensures the gate of the external
MOSFET will stay in the intended state even during
large transients. These output also has a reverse
current latch-up rating of 1.5A.
© 2006 Microchip Technology Inc.
Note 1:
PDIP, SOIC
DD
8-Pin
is the bias supply input for the MOSFET driver and
—
—
1
2
3
4
5
6
7
8
PIN DESCRIPTIONS
Supply Input (V
Control Input (INPUT)
Ground (GND)
CMOS Push-Pull Output
(OUTPUT)
capacitors
Duplicate pins must be connected for proper operation.
8-Pin
DFN
PAD
PIN FUNCTION TABLE
—
1
2
3
4
5
6
7
8
provide
TO-220
DD
5-Pin
TAB
—
—
—
—
1
2
4
5
3
)
DD
a
= 18V). The low
localized
OUTPUT
OUTPUT
Symbol
INPUT
GND
GND
V
V
V
(1)
NC
NC
DD
DD
DD
The
low-
Supply Input
Control Input
No Connection
Ground
Ground
CMOS Push-Pull Output
CMOS Push-Pull Output
Supply Input
Exposed Metal Pad
Metal Tab at V
3.5
The exposed metal pad of the DFN package is not
internally connected to any potential. Therefore, this
pad can be connected to a ground plane or other
copper plane on a printed circuit board to aid in heat
removal from the package.
3.6
The metal tab on the TO-220 package is at V
potentail. This metal tab is not intended to be the V
connection to MCP1406/07. V
using the Supply Input pin of the TO-220.
DD
Exposed Metal Pad
TO-220 Metal Tab
Potential
Description
MCP1406/07
DD
should be supplied
DS22019A-page 9
DD
DD