PIC16LC924-04I/PT Microchip Technology, PIC16LC924-04I/PT Datasheet - Page 17

• Manufacturer Part Number: PIC16LC924-04I/PT
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,TQFP,64PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16LC924-04I/PT

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: I²C, SPI
• Peripherals: LCD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: OTP
• Ram Size: 176 x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 6 V
• Data Converters: A/D 5x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.0
4.1
The PIC16C9XX family has a 13-bit program counter
capable of addressing an 8K x 14 program memory
space.
Only the first 4K x 14 (0000h-0FFFh) is physically
implemented. Accessing a location above the physi-
cally implemented addresses will cause a wraparound.
The reset vector is at 0000h and the interrupt vector is
at 0004h.
FIGURE 4-1: PROGRAM MEMORY MAP
1997 Microchip Technology Inc.
CALL, RETURN
RETFIE, RETLW
MEMORY ORGANIZATION
Program Memory Organization
Memory (Page 0)
Memory (Page 1)
On-chip Program
On-chip Program
AND STACK
Interrupt Vector
Stack Level 1
Stack Level 8
Reset Vector
PC<12:0>
13
0000h
0004h
0005h
07FFh
0800h
0FFFh
1000h
1FFFh
4.2
The data memory is partitioned into four Banks which
contain the General Purpose Registers and the Special
Function Registers. Bits RP1 and RP0 are the bank
select bits.
RP1:RP0 (STATUS<6:5>)
11 = Bank 3 (180h-1FFh)
10 = Bank 2 (100h-17Fh)
01 = Bank 1 (80h-FFh)
00 = Bank 0 (00h-7Fh)
The lower locations of each Bank are reserved for the
Special Function Registers. Above the Special Func-
tion Registers are General Purpose Registers imple-
mented as static RAM. All four banks contain special
function registers. Some “high use” special function
registers are mirrored in other banks for code reduction
and quicker access.
4.2.1
The register file can be accessed either directly, or indi-
rectly
(Section 4.5).
The following General Purpose Registers are not phys-
ically implemented:
• F0h-FFh of Bank 1
• 170h-17Fh of Bank 2
• 1F0h-1FFh of Bank 3
These locations are used for common access across
banks.
through
Data Memory Organization
GENERAL PURPOSE REGISTER FILE
the
File
PIC16C9XX
Select
DS30444E - page 17
Register
FSR