1
10-2010, Rev. 1010
www.tycoelectronics.com
© 2010 Tyco Electronics Ltd.
Contact Data
Contact arrangement
Contact gap
Rated voltage
Limiting continuous current
Limiting making current
Limiting breaking current
Limiting short-time current
Jump start test, ISO 16750-1
Contact material
Min. recommended contact load
Initial voltage drop,
Frequency of operation at nominal load
Operate/release time typ.
Electrical endurance
Max. DC load breaking capacity
Load limit curve: safe shutdown, no stationary arc/make contact.
Load limit curve measured with low inductive resistors verified for 1000 switching events.
23°C
85°C
125°C
overload current, ISO 8820-3
form A (NO) contact at 10A, typ./max.
resistive load at 14VDC
resistive load at 28VDC
2)
3)
4)
>1x10
>2x10
1 form A,
12VDC
conducting nominal current at 23°C
240A
1 NO
70A
50A
30A
70A
70A
50A
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
-
-
5
5
ops.
ops.
1.35 x 50A, 1800s
6 ops./min (0.1Hz)
3.50 x 50A, 0.5s
6.00 x 50A, 0.2s
24VDC for 5min,
2.00 x 50A, 5s
Silver based
1A at 5VDC
>1x10
10/300mV
1 form A,
7/2ms
24VDC
1 NO
240A
70A
50A
30A
25A
25A
-
-
-
5
ops. >1x10
5)
1 form A,
>0.8mm
24VDC
1 NO
240A
70A
50A
30A
40A
50A
ECR0629-N
-
-
5
ops.
1)
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.tycoelectronics.com/definitions
Contact Data
Mechanical endurance
1) Special high performance 24VDC version with contact gap >0.8mm, part number
2) The values apply to a resistive or inductive load with suitable spark suppression and
3) Current and time are compatible with circuit protection by a typical automotive fuse.
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at
5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay
Coil Data
Rated coil voltage
Coil versions, DC coil
6) Without components in parallel.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coil operating range
Does not take into account the temperature rise due to the contact current
E = pre-energization.
Coil
code
052
053
056
065
V23134-A0056-X408 (see part number table).
at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current
duration of maximum 3s for a make/break ratio of 1:10.
Relay will make, carry and break the specified current.
http://relays.te.com/appnotes/
coil increases the release time and reduces the lifetime caused by increased erosion
and/or higher risk of contact tack welding.
voltage
Rated
VDC
12
24
24
24
(continued)
Operate
voltage
14.4
16.0
14.4
VDC
7.2
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Release
voltage
VDC
1.6
3.2
4.0
2.4
12VDC, 24VDC
>1x10
resistance
Ω±10%
324
268
288
7
Coil
90
ops.
6)
TEVF4_OVR1
Rated coil
F134J_a_bw
power
1.6
1.8
2.1
2.0
W
6)