G6DS-1A-H DC5 Omron, G6DS-1A-H DC5 Datasheet - Page 4

• Manufacturer Part Number: G6DS-1A-H DC5
• Description: POWER RELAY, SPST-NO, 5VDC, 5A, PC BOARD
• Manufacturer: Omron
• Series: G6DSr

Specifications of G6DS-1A-H DC5

• Relay Type: High Sensitivity
• Coil Voltage Vdc Nom: 5V
• Contact Current Max: 5A
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 30V
• Coil Resistance: 208ohm
• Contact Configuration: SPST-NO
• Contact Form: SPST-NO (1 Form A)
• Contact Rating (current): 5A
• Switching Voltage: 250VAC, 30VDC - Max
• Coil Type: Standard
• Coil Current: 24mA
• Coil Voltage: 5VDC
• Turn On Voltage (max): 3.5 VDC
• Turn Off Voltage (min): 0.25 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Circuit: SPST-NO (1 Form A)
• Contact Rating @ Voltage: 5A @ 30VDC
• Control On Voltage (max): 3.5 VDC
• Control Off Voltage (min): 0.25 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: G6DS-1A-H-DC5; G6DS1AHDC5; Z2320

G6DS
Packing
1 stick = 25 Relays
1 packing case = 20 sticks (500 Relays)
1 carton box = 6 packing cases (3,000 Relays)
Precautions
More than two Relays can be closely mounted right side up as
shown in the following illustration. (This applies to the P6DS as
well.)
More than two Relays can be closely mounted upside down as
shown in the following illustration.
Note:
OMRON RELAY & DEVICES Corporation
C & C Power Relay Division
Marketing Department
1110 Sugi, Yamaga-city, Kumamoto-Pref., 861-0596 Japan
Tel: [phone]/Fax: [phone]
Cat. No. K130-E1-02
Stick packing
7.62 mm in the
upside-down
direction
5.08 mm
The space between Relays required for heat radiation
may vary with operating conditions. Contact your OMRON
representative for details.
2.54 mm
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Current flow:
5 A max.
Current flow:
2 A max.
In the interest of product improvement, specifications are subject to change without notice.
Socket Mounting Height
When mounting the Relay, insert it into the Socket as vertically as
possible so that the Relay terminals contact securely with the
contact pins on the Socket.
The P6DS is flux-resistive. Do not wash the P6DS with water. Dis-
mount the Relay from the Socket before soldering the Socket to a
PCB.
Disclaimer:
All technical performance data applies to the product as such;
specific conditions of individual applications are not considered.
Always check the suitability of the product for your intended pur-
pose. OMRON does not assume any responsibility or liability for
noncompliance herein, and we recommend prior technical clarifi-
cation for applications where requirements, loading, or ambient
conditions differ from those applying to general electric applica-
tions. Any responsibility for the application of the product remains
with the customer alone. THIS COMPONENT CAN NOT BE
USED FOR AUTOMOTIVE APPLICATIONS.
18.5 mm max.
Printed in Japan
0206-?M (0705) (B)
G6DS