600-4000-00 EAO, 600-4000-00 Datasheet - Page 7

• Manufacturer Part Number: 600-4000-00
• Description: LATCH, ACTUATOR, IP40
• Manufacturer: EAO

Specifications of 600-4000-00

• Svhc: No SVHC (18-Jun-2010)
• Approval Bodies: VDE, UL, CSA, SEV, SEMKO
• Contact Current @ Contact Voltage Ac Max: 6A
• External Depth: 35mm
• External: RoHS Compliant
• For Use With: Swisstac Series Illuminated Pushbutton Switches

Mounting Instruction
The switch is mounted in a fascia or control panel in three steps:
1. Detach front section, just in released position, as in drawing, remove fixing nut
2. Insert switch from back side in fascia/control panel
3. Snap on front section and tighten fixing nut
Important for IP 65
With models to IP 65, the sealing ring1)is already fitted
This must be removed if the SWISSTAC emergency
Stop identity plate (IP 65 model) is used.
Zero position
Hint for mounting: the torque with which the fixing nut is tightened must not exceed 50 Ncm.
Hint for dismounting: dismantling of switching element just with dismantling tool.
The switch is mounted in a fascia or control panel in three steps:
1. Detach terminal block as in drawing, remove fixing nut
2. Insert switch from front side in fascia/control panel
3. Reassemble the switch in the reverse order
emergency stop switch with key release 55 - 70 mm
emergency stop switch foolproof
keylock switch 45mm
To detach terminal block
Identity plate
Wiring diagram
Sealing ring2) is fitted as standard
in models to IP 65.
Swisstac
01.2002
587