96-905.0 EAO, 96-905.0 Datasheet - Page 33

• Manufacturer Part Number: 96-905.0
• Description: LENS, RECTANGULAR, BLACK
• Manufacturer: EAO

Specifications of 96-905.0

• Lens Color: Black
• Lens Width: 17.4mm
• Lens Height: 12.4mm
• Leaded Process Compatible: Yes
• For Use With: 96 Series Pushbutton Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Description
General notes
The series 99 contains indicators and illuminated pushbuttons with
maintained and momentary action with one or two contacts which may
be either normally open or normally closed or a combination of the two.
The illuminated pushbuttons are equipped with the low-level switching
system.
The series 99 PCB keylock switch with a spacing of 19.05 mm
completes the existing range of indicators and illuminated pushbuttons.
The PCB keylock switch is available with two and three positions, with
maintained action, and with either one or two normally open contacts as
well as with one normally open and one normally closed one.
Mounting
The illuminated pushbuttons of series 99 can be soldered to a printed
circuit board. The contact layout conforms to the module of 2.54 mm
(1/10 "). A centering pin ensures dimensionally exact mounting in rows
or blocks. With an M1.2 screw the pushbuttons can also be fixed to a
printed circuit board. (This screw must be ordered separately.) The
pushbuttons can be joined together easily with a coupling piece to form
rows or blocks. The layout of the PCB keylock switch conforms to the
module of 2.54 mm (1/10 "). Two centering pins ensure a dimensionally
exact mounting. The contact layout corresponds to that of series 99
switches.
Cleaning of soldered PCB
In many cases the boards are cleaned following mechanical soldering.
In this case it is essential to prevent the cleaning fluid containing dirt,
grease and flux from entering the switch.
Lenses
The lens consists of a bezel, a marking plate and a transparent lens
plate, which may be either flush or concave.
Marking
For further information about engraving, hot stamping and film inserts
see part Marking.
Illumination
Illumination of the different coloured lenses is by lamps Bi-Pin T1
longlife (6 ... 36 V) or LED Bi-Pin T1.
Luminosity and wave length scattering caused by the technology used
in the LED manufacturing processes may lead to visual differences in
our products.
Position indication
The status of a maintained action switch can be determinded by the
position of the lens.
Keylock switch
Standard lock (Index D). 10 different locks with standard nos. 311 ...
320. If the lock number is not specified, we supply no. 311. Additional
125 locks, no. 321 ... 445, are available on request. Master keys for
locks no. 311 ... 445 may be ordered by quoting no. 31-989.300. Two
keys are supplied with each keylock switch. Spare keys for standard
DOM locks may be ordered by quoting no. 31-989 (please state the lock
number).
33
Product Information
Specimen order
0
We reserve the right to modify technical data
All dimensions in mm
Indicator :
- Indicator actuator single, 18.6 x 18.6 mm
Essential accessories :
- Lens single complete, plastic colourless
- Single-LED T1 Bi-Pin, 2.2 VDC, 20 mA,
transparent flush, 18.6 x 18.6 mm
yellow
07.2008
99-050.807
99-901.9
10-2602.3174C
33
99