600-5150-00 EAO, 600-5150-00 Datasheet - Page 60
![LENS, BLUE](/photos/19/46/194604/42256304_sml.jpg)
600-5150-00
Manufacturer Part Number
600-5150-00
Description
LENS, BLUE
Manufacturer
EAO
Datasheet
1.600-4000-00.pdf
(88 pages)
Specifications of 600-5150-00
Lens Width
24mm
Svhc
No SVHC (18-Jun-2010)
Colour
Blue
External Length / Height
18mm
External Width
24mm
Height
18mm
Width
24mm
Lens Colour
Blue
Lens Height
18mm
Rohs Compliant
Yes
For Use With
35mm Series
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
technical data
Current consumption
approx. 13 mA
Reverse-connect protection
yes
Acoustics
approx. 84 dB at 0.1 m
Frequency
approx. 2.3 kHz
Unit
General
In accordance with the low-voltage directive, our products are labelled
with the CE mark.
SWISSTAC switches are modularly designed and are divided into the
following three groups:
1. Front
Man-switch interface and state detector
2. Intermediate piece
Set and reset device, bulb holder, latching function
3. Switching element block
Up to five switching elements can be integrated in a switching element
block.
Each switch is tested fully mounted. Electrical output and service life
are determined by the switching element. Front and intermediate piece
are designed for maximum service life of the switching element. They
determine in what way the switches are protected against external in-
fluences. The type approvals relate to the complete switches. The ap-
proval regulations are UL 1054, VDE 0630 (EMERGENCY button VDE
0660), CSA 22.2.
Mechanical characteristic values
Resistance to vibration
tested as per DIN EN 60068-2-6 (10 g to 2000 Hz)
Shock resistance
tested as per DIN EN 60068-2-27 (semi-sinusoidal, 50 g during 11 ms)
(single impacts, semi-sinusoidal)
15 g during 11 ms as per DIN EN 60068-2-29
Approvals
- CE (declaration of conformity)
- CSA
- UR
- VDE
- ENEC
Front
General
The front notifies the switching status, serves for activation of the switch
and determines its type of protection. The form and colours of the front
also characterise the appearance of the entire switching system. With
the exception of the front ý 18 mm of the illuminated pushbuttons 55
and 70 mm, all front frame elements have activation protection.
640
01.2002
Material
Lens
Thermoplast (PC)
Front bezel
Thermoplast with fireproofing (PBT)
Actuator 35 mm
Thermoplast with fireproofing (PBT)
Lock housing
Thermoplast with fireproofing (PBT)
Lock cylinder
Rynite reinforced with carbon fibre (PBT + CF)
Seal bellows (IP 65)
Silicon
Mechanical characteristic values
Protection class
as per IEC 529 (front side)
IP 40
IP 65
IP 67
protection against water
0 = without protection
5 = spray water
7 = watertight up to 1 m WS
protection against solid matter of varying size
4 = protection against solid matter > ý 1 mm
6 = dust-tight
see "Intermediate piece" for other properties
Intermediate piece
General
The intermediate piece serves for several properties such as the setting
and resetting functions, and the latching device. In addition, all parts
necessary for a complete switch are fastened to the intermediate piece.
These include the front parts, switching element block and lamps.
Material
Housing
Thermoplast with fireproofing (PC)
Lamp connection
Nickel silver 2.8 x 0.5 mm
Electrical characteristic values
Electric strength
3750 V AC, 1 min. as per DIN EN 61058-1
Insulation resistance
> 10
Illumination
Lamp voltage
6 V to 125 V as per CSA
6 V to 60 V as per VDE, UL, DEMKO
12
Ω as per IEC 512-2-10
Swisstac